• +1 (800) 826-0777
  • VIRTUAL TOUR
  • Mass Notification
  • Threat Intelligence
  • Employee Safety Monitoring
  • Travel Risk Management
  • Emergency Preparedness
  • Remote Workforce
  • Location and Asset Protection
  • Business Continuity
  • Why AlertMedia
  • Who We Serve
  • Customer Spotlights
  • Resource Library
  • Downloads & Guides

A "caution wet floor sign" in an entryway to prevent slips trips and falls with people walking past.

Prevent Workplace Slips, Trips, and Falls—8 Safety Tips

Mopping up a spill or double-checking a guardrail might seem like simple common sense, but slips, trips, and falls are the second most common cause of death at work. These are life-saving procedures. Keep reading for practical tips to prevent workplace accidents.

Blog-CTA-Sidebar-Graphic-WorkplaceSafety-Checklist

  • Slip, Trip, and Fall Hazards Listed
  • Clarifying OSHA Standards
  • Prevent Workplace Slips, Trips, and Falls

These are familiar scenarios at home: slipping on a wet floor in the kitchen and tripping over a toy left out by the kids. While annoying, these accidents are typically minor hazards in the home. You might stub your toe, but rarely are there severe consequences.

In the workplace, it’s a different and far more serious story. Slips, trips, and falls account for over 200,000 workplace injuries per year. In 2020, nearly one in five accidents leading to missed work was due to a slip, trip, or fall. They’re also the second-leading cause of workplace fatalities.

As a safety leader, you’re responsible for your company’s duty of care and for providing a safe workplace . This blog post will examine common hazards leading to slips, trips, and falls and the steps you can take to minimize injury risks for your team.

Download Our Workplace Safety Checklist

What are slip, trip, and fall hazards in the workplace.

Accidents involving slips, trips, and falls are often grouped together. While they’re similar, it’s important to understand the distinction since they each have different causes and consequences.

Slips occur when someone’s footwear loses traction with the surface they’re on, causing a loss of balance. Under some circumstances, slipping can lead to a fall.

Trips happen when someone hits their foot or lower leg on an object. As their upper body continues moving forward while their lower body remains stationary, the person may lose their balance in the process.

Falls often result from slips or trips, but they can also happen on their own. For example, a worker on a ladder or scaffolding can lose their balance and fall without slipping or tripping. Falls are also possible on flat surfaces and can still cause serious injuries.

Once you understand the hazards that lead to each type of accident, you can identify and mitigate risks in your workplace. Here are some of the most common causes of slips, trips, and falls in the workplace:

Slip Hazards

  • Spills of wet or dry substances
  • The cleaning process during spill removal
  • Employees rushing or not paying attention to workplace conditions, especially while carrying objects
  • Slippery floor surfaces such as marble or laminate
  • Wet surfaces
  • Poor lighting that obscures hazards
  • Inappropriate footwear for the environment
  • Transitioning between different types of surfaces

Trip Hazards

  • Objects or obstructions in walkways
  • Uneven surfaces on flooring or concrete
  • Cables, cords, and hoses that aren’t properly secured or organized
  • Unmarked steps or ramps
  • Irregular stairs or stairs without railings
  • Carpet, rugs, or mats with wrinkles or lifted edges

Fall Hazards

  • Improperly used or poorly maintained ladders
  • Elevated surfaces without guardrails
  • Floor and wall openings
  • Working in elevated environments without a safety harness
  • Ill-fitting or improperly used PPE, such as helmets and safety lines

slips and trips

Preview the Workplace Safety Checklist

Are There OSHA Standards Related to Slips, Trips, and Falls?

Despite how common these injuries are, there is no specific OSHA standard on slips, trips, and falls. However, several OSHA rules indirectly address the same hazards.

The most important regulation to be aware of is 29 CFR 1910 Subpart D, which covers walking and working surfaces. OSHA updated the standard in 2017, introducing many upgrades to fall protection system requirements, improved employer-provided inspection guidelines, and a greater emphasis on safety training for employees.

For the construction industry, 29 CFR 1916 contains numerous fall-related regulations. Subpart M specifically addresses fall prevention, but other sections, such as Subpart L (scaffolds) and Subpart E (personal protective and lifesaving equipment), are also relevant. OSHA used 29 CFR 1916 as guidance when revising 29 CFR 1910, so the two guidelines now reflect many of the same OSHA violations .

As with any other workplace hazard or accident, OSHA recordkeeping requirements still apply in the event of a slip, trip, or fall incident. Internally, the reporting process is also an opportunity to review the details of the incident and determine how you can update your workplace safety policy to prevent similar accidents in the future.

How to Prevent Slips, Trips, and Falls in the Workplace

Many hazards that cause slips, trips, and falls are inevitable. However, injuries and accidents are not. To prevent slips, trips, and falls, train your employees to follow a three-step process:

  • Recognize the hazard: Identify conditions that could lead to a slip, trip, or fall.
  • Evaluate the hazard: Examine the situation and determine what level of risk it presents and who it affects.
  • Control the hazard: Avoid the risk by removing the hazard (such as mopping up a spill) or implementing safety equipment and procedures (such as installing handrails on an elevated platform).

Here are eight workplace safety tips to prevent falls, trips, and slips.

1. Teach situational awareness

Since many causes of slips, trips, and falls are foreseeable, situational awareness in the workplace is one of the best preventative measures. Encourage your employees to pay attention to their surroundings and the risks they present:

  • Look at walking surfaces for spills, obstacles, or other potential hazards
  • Watch for signage that warns of increased hazards
  • Be aware of conditions such as weather or time of day that might increase the risk of an accident
  • Take shorter and more cautious steps on slippery surfaces

2. Encourage proper footwear

Like any other form of PPE, proper footwear can significantly reduce the risk of accidents. Research has found that slip-resistant shoes can reduce injury claims by 67% in environments with slippery work surfaces.

Employees should regularly inspect their shoes and make sure the soles aren’t worn out, as the lack of tread increases the danger of slipping. Additionally, anyone who works in conditions exposed to winter weather hazards should wear insulated boots. Cold temperatures can decrease muscle function, increasing the risk of slipping, tripping, or falling.

3. Utilize signage

Signage is an effective warning system for many workplace risks, but it can be especially effective in preventing slips, trips, and falls. There are two types of signs you can use to increase occupational safety:

  • Temporary: Use warning signs while addressing a new hazard, such as cleaning up a spill, repairing a handrail, or replacing a ripped carpet. While temporary signage can help prevent injuries, you still need to address the actual hazard as quickly as possible.
  • Permanent: For unavoidable hazards, such as slippery surfaces, a permanent sign can help warn employees to be careful. Use these sparingly, though, as it’s easy for people to ignore signs they see every day.

4. Keep floors clear and clean

Good housekeeping can help prevent most slips, trips, and falls. The details of keeping walking areas clean will vary widely by work environment, but there are a few common themes to encourage workplace safety:

  • Report spills immediately, and warn nearby employees until someone can clean the contaminated surface
  • Keep walkways clear of obstacles, loose objects, and anything that someone could trip over
  • Place mats at entrances and exits so people can dry their shoes and avoid tracking water or other substances around the workplace
  • Install handrails on stairways and elevated walkways

5. Apply non-slip mats and coatings

In some situations, keeping floors from becoming slippery is nearly impossible. Whether it’s liquid splashing or steam condensing, you must focus on mitigating the risk rather than avoiding it altogether.

For smaller or less demanding settings, non-slip mats can help employees maintain traction while walking around. In other cases, treating the floor with a permanent coating can help reduce slipping risks, even in the constant presence of liquids.

Who is at risk for slips, trips, and falls?

While all industries have some level of risk for a slip, trip, or fall, there are some industries where the risk is much higher, and the potential result could be much more dangerous. Here are some of the highest-risk industries:

  • Construction
  • Manufacturing
  • Transportation/shipping/logistics
  • Outdoor maintenance/groundskeeping
  • Foodservice/hospitality

6. Ensure proper lighting

To identify slip, trip, and fall hazards, your employees need to be able to see their surroundings. Make sure that all of your work areas have proper lighting, especially in areas that are more prone to unsafe conditions.

While this can be a challenge in outdoor work environments, especially at night, it’s even more critical in those situations. Environmental conditions can lead to increased risks, and employees need to be able to see and avoid them. Adequate lighting should also extend to parking lots and walking areas around your facilities.

7. Develop safety programs

Your company’s safety plans and programs should include specific guidelines for preventing slips, trips, and falls. There are a few key topics to consider when developing these policies:

  • The types of surfaces employees work and walk on and whether they present extra risks
  • Seasonal or regional conditions that could heighten hazards, such as winter weather threats
  • Specific OSHA regulations that apply to your workplace
  • Potentially hazardous equipment training such as ladder safety
  • Regular inspection plans to ensure your team is maintaining a safe work environment
  • Policies to report hazards using your company’s two-way communication platform
  • First aid training , so employees are prepared to respond safely should injuries occur

8. Provide Slips, Trips, and Falls Training

Lastly, training your employees to avoid slips, trips, and falls will help keep them safe. Provide specific guidance on the environments they’ll work in and the hazards they’ll face. For example, a slips, trips, and falls safety talk for food service workers should focus on wet floors and walking safely in crowded, fast-paced environments. Conversely, office workers could use extra reminders to watch for stray power cords and keep walkways clear of boxes, files, and other tripping hazards.

Working slips, trips, and falls into your safety topics for meetings is also helpful. Regular safety talks or safety moments are an excellent opportunity to remind your team about seasonal risks or update them on newly installed safety measures.

Don’t Let Your Safety Standards Slip

Slips, trips, and falls are some of the most common workplace injuries. Fortunately, you can usually prevent them with proper planning and safety measures.

By making slip, trip, and fall prevention a part of your company’s safety culture, you can ensure your employees are aware of their surroundings and ready to look out for each other’s safety. Enable them to report hazards easily, address risks quickly, and train them to avoid situations that are likely to cause injury.

With the right planning and prevention, even the most intense work environments can be as safe as a walk in the park.

More Articles You May Be Interested In

Winter Slips, Trips, and Falls: Prevention and Training to Protect Your Employees

Workplace Safety Checklist

Please complete the form below to receive this resource.

Check Your Inbox!

The document you requested has been sent to your provided email address.

Cookies are required to play this video.

Click the blue shield icon on the bottom left of your screen to edit your cookie preferences.

Cookie Notice

Weill Cornell Medicine

  • Weill Cornell Medicine

Environmental Health and Safety

Slips, Trips, and Falls: Understanding, Preventing, and Mitigating Risks

By Gian Joseph, Safety Advisor

As we enter the rainy and cold season, we face several risks , which include slips , trips, and fall s in our day-to-day activities. It is important t o be aware of hazards around us and learn how to properly identify and assess any risks with each step.  

Slips, trips, and falls (STFs) are common accidents that can lead to severe injuries. These incidents occur in various settings, from homes and workplaces to public spaces , and i t is essential to understand the causes, consequences, and , most importantly, strategies for prevention and mitigation.   

1. Understanding the Dynamics of STFs. STFs are caused by the following .  

Insu fficient friction between the shoe and the walking surface. Common causes include wet or greasy floors, spills, and loose debris (Slip and Fall Accidents, 2021).  

When a person's foot collides with an object or an uneven surface, it caus es them to lose balance. Typical trip hazards include cluttered walkways, electrical cords, uneven flooring, and damaged or upturned mats (Slip and Fall Accidents, 2021).  

2. The Impact of STFs  

Slips, trips, and falls have far-reaching effects, affecting individuals and society . Personal i njuries range from minor cuts , bruises, sprains , and abrasions to fractures, dislocations, and head injuries (National Safety Council, 2021). The medical expenses associated with treating STF-related injuries can be substantial , including hospital stays, surgeries, rehabilitation, and ongoing care (National Safety Council, 2021). STFs can result in missed workdays and reduced productivity for both individuals and employers. Workers' compensation claims and absenteeism contribute to economic costs (National Safety Council, 2021). Lastly, t he physical and psychological consequences of STFs can limit mobility, independence, and overall quality of life, especially among older adults ( Sahyoun et al., 2020).  

3. Prevention and Mitigation Strategies  

Preventing and mitigating STFs involves a combination of awareness, environmental modifications, and education . H ere are some ways you can take precaution s against STFs in your daily activities;  

Clear Pathways: Maintain clear, unobstructed walkways by removing clutter and tripping hazards such as cords, toys, and loose rugs (Occupational Safety and Health Administration [OSHA], 2002).  

Adequate Lighting: Ensure proper lighting in all areas, both indoors and outdoors, to improve visibility and reduce the risk of tripping over obstacles (OSHA, 2002).  

Slip-Resistant Flooring: Install slip-resistant flooring materials, especially in areas prone to moisture, like bathrooms and kitchens (OSHA, 2002).  

Footwear: Encourage the use of proper footwear with good traction, especially in environments where slip hazards are prevalent ( Sahyoun et al., 2020).  

Handrails and Guardrails: Install and maintain handrails and guardrails on stairs, ramps, and elevated platforms to provide support and prevent falls (OSHA, 2002).  

Warning Signs: Use signage to alert individuals to potential hazards, such as wet floors or uneven surfaces (OSHA, 2002).  

Education and Training: Promote awareness and provide training to individuals on recognizing and avoiding STF hazards (National Institute for Occupational Safety and Health [NIOSH], 2015).  

Workplace Safety: Employers should implement safety protocols and conduct risk assessments in the workplace, addressing potential STF risks (NIOSH, 2015).  

Regular Maintenance: Routinely inspect and maintain buildings, walkways, and outdoor areas to identify and address potential hazards promptly (NIOSH, 2015).  

4. A Holistic Approach to STF Prevention  

Preventing and mitigating STFs require a collaborative approach involving individuals, organizations, and communities:  

Individuals : Exercise caution when walking, especially in unfamiliar or potentially hazardous environments. Wear appropriate footwear and take your time, especially in wet or slippery conditions ( Sahyoun et al., 2020).  

Employers: Create a safe work environment by identifying and mitigating STF risks. Provide training to employees on safety protocols and the proper use of equipment (OSHA, 2002).  

Property Owners and Managers: Ensure properties are well-maintained and free from hazards. Regularly inspect and address issues promptly (NIOSH, 2015).  

Government and Local Authorities: Enforce building codes and regulations that promote safety, especially in public spaces and commercial buildings (OSHA, 2002).  

Conclusion  

Slips, trips, and falls are preventable accidents that carry substantial personal, economic, and societal costs. By comprehending the causes, consequences, and prevention strategies, we can significantly reduce the incidence of STFs and mitigate their impact. Whether at home, at work, or in public spaces, prioritizing safety and fostering awareness about STFs is crucial for the well-being of individuals and communities. Let us strive collectively to create environments where everyone can move safely and confidently, free from the fear of falling.  

References:  

National Institute for Occupational Safety and Health (NIOSH). (2015). Preventing Slips, Trips, and Falls in Wholesale and Retail Trade Establishments. https://www.cdc.gov/niosh/docs/2015-100/pdfs/2015-100.pdf  

National Safety Council. (2021). Injury Facts. https://injuryfacts.nsc.org/work/overview/work-safety-introduction/work-...  

Occupational Safety and Health Administration (OSHA). (2002). OSHA Publication 3151-12R. Preventing Slips, Trips, and Falls in Wholesale and Retail Trade Establishments. https://www.osha.gov/Publications/osha3151.pdf  

Sahyoun , N. R., Pratt, L. A., & Lentzner , H. (2020). The Changing Profile of Nursing Home Residents: 1985-1997. Journal of Aging and Health, 12(3), 336-363.  

Slip and Fall Accidents. (2021). InjuryClaimCoach.com. https://www.injuryclaimcoach.com/slip-and-fall-accidents.html  

Please note that the sources cited are accurate as of the time of writing this article. For the most current information, consult authoritative sources and local health authorities.  

Go to the staff directory for individual contacts within EHS. You may also use the Weill Cornell Medicine online directory to search for faculty and staff.

Create an EHS Incident

Weill Cornell Medicine Environmental Health and Safety 402 East 67th Street Room LA-0020 New York, NY 10065 Phone: (646) 962-7233 Fax: (646) 962-0288

  • Skip to main content

Advancing social justice, promoting decent work

Ilo is a specialized agency of the united nations, slips and trips.

Why is dealing with slips and trips important?

What do employers have to do, how can they do it.

  • Prevent floors from getting wet or contaminated in the first place.
  • Have procedures in place for both routine and responsive cleaning.
  • If a spillage does happen, clean it up quickly.
  • If floors are left wet after cleaning, stop anyone walking on them until they are dry and use the right cleaning methods and products.
  • Look out for trip hazards, such as uneven floors or trailing cables, and encourage good housekeeping by your workers.
  • Make sure workers wear footwear that is suitable for the environment they are working in.
  • Make sure your flooring is suitable, or floors likely to get wet are of a type that does not become unduly slippery.
  • Slips and Trips eLearning Package (STEP) This is designed to help readers assess and manage slip and trip hazards in the workplace. STEP is a great introduction to slips and trips, and covers how they are caused, why preventing them is important and how to tackle them.It includes easy-to-follow guidance, case studies, videos, animations and quizzes. These are designed to give information needed to set up and maintain a safer way of working.
  • HSE’s slips and trips  
  • Napo in... no laughing matter
  • Skip to main content
  • Skip to site information
  • Departments

Language selection

  • Français

Canadian Centre for Occupational Health and Safety

Scheduled maintenance - Thursday, July 12 at 5:00 PM EDT

We expect this update to take about an hour. Access to this website will be unavailable during this time.

Prevention of Slips, Trips and Falls

On this page, how do falls happen, how to prevent falls due to slips and trips, what can you do to avoid falling at work.

Statistics show that the majority (67%) of falls happen on the same level resulting from slips and trips. The remaining 30% are falls from a height. This document will summarize information on "falls on the same level" (slips and trips). Falls from an elevation, such as falls from ladders, roofs, down stairs or from jumping to a lower level, etc., is discussed in other documents since each type of fall must be assessed as part of a fall prevention program .

Slips happen where there is too little friction or traction between the footwear and the walking surface. Common causes of slips are:

  • wet or oily surfaces
  • occasional spills
  • weather hazards
  • loose, unanchored rugs or mats
  • flooring or other walking surfaces that do not have the same degree of traction in all areas

Trips happen when your foot collides (strikes, hits) an object causing you to lose balance and, eventually fall. Common causes of tripping are:

  • obstructed view
  • poor lighting
  • clutter in your way
  • wrinkled carpeting
  • uncovered cables
  • bottom drawers not being closed
  • uneven (steps, thresholds) walking surfaces

Both slips and trips result from unintended or unexpected change in the contact between the feet and the ground or walking surface. This fact shows that good housekeeping, quality of walking surfaces (flooring), selection of proper footwear, and appropriate pace of walking are critical for preventing fall incidents.

Housekeeping

Good housekeeping is the first and the most important (fundamental) level of preventing falls due to slips and trips. It includes:

  • cleaning all spills immediately
  • marking spills and wet areas
  • mopping or sweeping debris from floors
  • removing obstacles from walkways and always keeping walkways free of clutter
  • securing (tacking, taping, etc.) mats, rugs and carpets that do not lay flat
  • always closing file cabinet or storage drawers
  • covering cables that cross walkways
  • keeping working areas and walkways well lit
  • replacing used light bulbs and faulty switches

Without good housekeeping practices, any other preventive measures such as installation of sophisticated flooring, specialty footwear or training on techniques of walking and safe falling will never be fully effective.

For more information about effective housekeeping, visit the OSH Answers document on Workplace Housekeeping - Basic Guide .

Changing or modifying walking surfaces is the next level of preventing slip and trips. Recoating or replacing floors, installing mats, pressure-sensitive abrasive strips or abrasive-filled paint-on coating and metal or synthetic decking can further improve safety and reduce the risk of falling. However, it is critical to remember that high-tech flooring requires good housekeeping as much as any other flooring. In addition, resilient, non-slippery flooring prevents or reduces foot fatigue and contributes to slip-prevention measures.

In workplaces where floors may be oily or wet or where workers spend considerable time outdoors, prevention of fall incidents should focus on selecting proper footwear. Since there is no footwear with anti-slip properties for every condition, consultation with manufacturers is highly recommended.

Properly fitting footwear increases comfort and prevents fatigue which, in turn, improves safety for the employee. For more information on footwear visit the OSH Answers document on Safety Footwear .

You can reduce the risk of slipping on wet flooring by:

  • taking your time and paying attention to where you are going
  • adjusting your stride to a pace that is suitable for the walking surface and the tasks you are doing
  • walking with the feet pointed slightly outward
  • making wide turns at corners

You can reduce the risk of tripping by:

  • keeping walking areas clear from clutter or obstructions
  • keeping flooring in good condition
  • always using installed light sources that provide sufficient light for your tasks
  • using a flashlight if you enter a dark room where there is no light
  • making sure that things you are carrying or pushing do not prevent you from seeing any obstructions, spills, etc.
  • Fact sheet last revised: 2023-03-28

Slips, Trips, and Falls toolbox talk

A simple, 5 minute outline of what to cover in a toolbox talk on Slips, Trips, and Falls.

Download a Slips, Trips, and Falls toolbox talk pdf

Slips, trips and falls are a common reason for many of the injuries in workplaces. They can cause minor injuries but can also lead to serious, long-term injuries. Many slip, trips and falls are avoidable and there are usually easy solutions a workplace can apply to control the risk, either by eliminating or minimising it. It could be as simple as cleaning up a spillage straight away, or moving a cord off a walkway which can prevent injuries from occurring.

Why run a Slips, Trips, and Falls Toolbox Talk?

  • Prevent unnecessary injury from slip, trips and falls by improving awareness and training
  • Fewer injuries means higher productivity
  • Makes sure workers know what to look for and what to do about it to reduce the risk of an injury occurring

What to watch out for that are common causes of slip, trips and falls? 

  • Poor housekeeping & messy sites 
  • Poor lighting 
  • Uneven walking surfaces 
  • Clutter on site 
  • Uncovered cords and cables 
  • Weather conditions (e.g. rain, ice, dust) 
  • Obstructed views 
  • Unsuitable footwear 
  • Distractions (e.g. cell phone, other workers) 

What can you do to help prevent slips, trips and falls occurring? 

  • Keeping work areas clear & tidy from clutter, obstructions and rubbish 
  • Any waste placed in designated bins 
  • Clean up any leaks or spills immediately 
  • Put tools and equipment away
  • Wear suitable footwear (e.g. grippy, anti-slip) 
  • Ensure work areas are well lit and sufficient light for work
  • Keep cords and cables out of walkways, covered or secured 
  • Be aware of your surroundings and focus on what you are doing 
  • Work to the weather conditions 

What if a slip, trip or fall occurs or nearly occurs? 

  • Report all slip, trip and fall accidents and near misses, with or without injury, this will help identify the hazards and implement control measures to prevent reoccurrence

Key takeaways 

  • Simply cleaning up your work area as you go, can help reduce slip, trips and falls 
  • Make sure you are always aware of your surroundings and look where you are walking  

If you see a hazard that has the potential to cause a slip, trip or fall then pick it up or fix it – don’t wait for someone else to do it. Do it yourself!

Sales Inquiries Contact:

  • AU  02 5104 6116
  • NZ  09 886 3309

Support Inquiries Contact:

  • [email protected]
  • Help Centre
  • Media Enquiries
  • Toolbox Talk Topic Tool
  • Health & Safety Consultant Directory
  • Terms and Conditions
  • Privacy Policy
  • Account Owner Terms
  • Facebook logo to SaferMe FACEBOOK PAGE
  • Twitter logo to SaferMe twitter PAGE

Slips, Trips, and Falls

Members can click here for an ad-free version of this talk!

Slips, Trips, and Falls Safety Talk

Slips, trips, and falls are one of the leading causes of injuries and fatalities in the workplace. According to OSHA, slip, trip, and fall incidents cause 15% of all accidental deaths and are second only to motor vehicle incidents as a cause of fatalities on the job. These types of incidents can result in life-changing injuries to the employees who suffer them.

Common Slip, Trip, and Fall Incidents

  • Falls from elevation are often deadly or result in serious injury and may include falls from ladders, falls off of mobile equipment, falls from roofs or other elevated structures, etc.
  • Slip incidents on slippery surfaces such as snow and ice are common in colder geographical areas in the U.S. Wet floor conditions or spilled liquids are also common causes of slip incidents at work.
  • Trips can be caused by a multitude of reasons, including poor housekeeping , changes in elevation, poor lighting conditions, improper footwear, etc.

Mitigation Actions to Prevent Slip, Trip, and Fall Incidents

  • Always use fall prevention or protection for work over 4ft in general industry work and 6ft in the construction industry. Protect workers by using proper guarding of any holes or open windows and use guardrails to prevent falls. Where guardrails are not feasible, use adequate fall protection.  An example of adequate fall protection is a full-body harness and a self-retracting lanyard attached to an approved anchor point with 100% tie-off.
  • Proper housekeeping is very important in preventing slip, trip, and falls incidents. Objects on the ground create a hazard for anyone walking or working in the area. Maintain clearly defined paths for walking in the work area. Maintain organized laydown yards for tools and equipment out of the way of employee foot traffic.
  • Address any wet, slippery, or icy walking surfaces in your work area. Post signs of any hazardous surfaces until the situation is taken care of completely.
  • When climbing up or down a portable or fixed ladder, ensure that you use proper techniques, such as using three points of contact and keeping your belt buckle within the sides of the ladder. Do not lean to reach objects- this can throw off your balance, and you could fall.

Discussion points:

-Are there trip hazards due to improperly placed objects in your work area?

-Has anyone or a close family member of yours experienced a severe fall? How has it affected you/ them?

-What are other ways we can protect ourselves from slips, trips, and falls here at our site?

Slip, Trip, and Fall Safety Presentation

Looking for a complete safety meeting on slips, trips, and falls? This safety meeting focuses on injury statistics, common slips/trips/fall hazards, and best practices to reduce the risk of injuries.

This product bundle includes an editable 10-slide PowerPoint presentation, an editable 7-question quiz, an answer sheet, three related safety talks , and a sign-in sheet.

This product provides everything you need to have a safety meeting and the supporting materials to create a longer safety campaign to keep safety at the top of your employees’ minds.

Save your time by purchasing this slips, trips, and falls safety bundle!

Buy Now Button

Do you want downloadable PDFs of all of the talks? Join as a member and get all of the 250+ free talks as well as 300+ additional talks in PDFs that are easy to download and print!

One thought on “Slips, Trips, and Falls”

How do i get free safety talks from your site i am needing industrial construction safety talks oil and gas rigging installing piping etc

Comments are closed.

Facebook Meta Pixel

Contact | Subscribe | Media centre

Home

  • Lifting, pushing and pulling
  • Psychosocial hazards
  • Working at heights
  • Crystalline silica and silicosis

Managing health and safety

  • Identify, assess and control hazards
  • Safety data sheets
  • Personal protective equipment
  • Emergency plans and procedures
  • Incident reporting

Industry and business

  • Construction
  • Small business
  • Agriculture
  • Gig economy

The Commonwealth, states and territories regulate and enforce WHS laws.

Find your Regulator

Model WHS Laws

We created the model WHS laws in 2011.

  • Model WHS Act
  • Model WHS Regulations
  • Duties under Model WHS laws
  • Codes of Practice
  • Legislation

WHS laws in your jurisdiction

Contact your regulator

Data and Research

We collect, analyse and publish data and information on work health and safety and workers' compensation.

See our data

  • Work-related fatalities
  • Work-related injuries
  • Work-related diseases
  • Return to Work
  • Explore our data
  • About our data
  • Industry benchmarking
  • Research by industry or topic

See our latest Key work health and safety statistics

explore our data

Workers' Compensation

We develop national policy and strategy about workers' compensation.

  • Workers’ compensation
  • Comparing workers' compensation in Australia
  • National Return to Work Strategy
  • Deemed diseases
  • Permanent impairment
  • Workers' compensation for psychological injury

National Return to Work Strategy

Read the Strategy

Resources and Publications

We publish a wide range of resources covering many work health and safety topics.

  • Codes of practice
  • Video and audio
  • Corporate publications

Media centre

  • Media releases
  • News update

Read our Codes of Practice

read the codes

Slips, trips and falls

Each year slips, trips and falls cause thousands of preventable injuries.

  • Safety by topic

The most common ones are: 

  • musculoskeletal injuries (injuries to muscles, nerves, tendons, joints, cartilage and spinal discs)
  • dislocations. 

More serious injuries and deaths can also happen. 

Slip, trip and fall hazards 

Some things that can cause you to slip are: 

  • the wrong footwear 
  • polished, wet or greasy floors. 

In most cases, people trip on low obstacles that are hard to spot, such as: 

  • uneven edges in flooring 
  • loose mats 
  • open drawers 
  • untidy tools, or 
  • electrical cables. 

Falls can result from a slip or trip, but many occur from low heights. For example: 

  • ditches, or 
  • wet or slippery surfaces. 

WHS duties  

As a person conducting a business or undertaking (PCBU), you must always aim to eliminate the risk of slips, trips and falls, so far as is reasonably practicable. If that is not possible, you must minimise risks so far as is reasonably practicable. 

You must identify hazards, and assess and control risks. Think about your: 

  • work areas 
  • work procedures 
  • equipment.  

Consulting with workers can help you find better and easier ways to identify and minimise risks. You should also review control measures to ensure they are working as planned.  

Workers also have duties, including taking reasonable care for their own health and safety. 

Managing risks  

The best way to manage the risk of slips, trips and falls is to eliminate hazards at the design stage of the workplace.  

If you can’t eliminate the risk, you must minimise it so far as is reasonably practicable. 

Designing safe workplaces 

In designing floors, stairs, lighting, drainage and storage: 

  • keep floors at a single level and use slip-resistant floor coverings 
  • install extra power points to avoid trip hazards from trailing cords 
  • ensure all areas are well lit, particularly stairwells 
  • have good drainage and slip resistant grates 
  • have lots of storage, so things aren’t left in walkways. 

Safe work procedures 

Work procedures can also impact on the incidence of slips, trips and falls. Have clear procedures to: 

  • remove rubbish to avoid trip hazards 
  • return tools and other items to their storage areas after use 
  • report and clean spills 

Keep the workplace clean 

All workers share responsibility for keeping the workplace clean and tidy.  

Make sure you: 

  • have adequate rubbish and recycling bins 
  • have cleaning schedules in place 
  • dry floors after cleaning 
  • don’t have cords on walkway or work area floors. 

Training helps workers become more aware of slip and trip hazards and helps to prevent injuries.  

Training should include:  

  • awareness of slip and trip hazards 
  • identifying effective control measures 
  • duties of workers. 

Using personal protective equipment (PPE) 

As a PCBU, you should only use PPE: 

  • after you have implemented all other possible control measures. 
  • as an interim measure until you can use a better control measure 
  • as a backup in addition to other control measures. 

Slip-resistant footwear 

Slip-resistant footwear is a type of PPE. 

Slip-resistant footwear should be appropriate for the work and workers must wear it properly. 

In wet conditions, the shoe sole tread should: 

  • be deep enough to help penetrate the surface water 
  • make direct contact with the floor. 

In dry conditions, the shoe sole tread: 

  • pattern should be a flat bottom construction 
  • should grip the floor with maximum contact area. 

Types of slip-resistant footwear 

Urethane and rubber soles are more slip resistant than vinyl and leather soles.  

Sole materials that have tiny cell like features are slip resistant. 

Supporting information

  • Model Code of Practice: How to manage work health and safety risks  
  • Model Code of Practice: Managing the work environment and facilities 
  • Slips and trips at the workplace fact sheet  
  • The interactive safe work method statement (SWMS) tool provides information on preparing, using and reviewing SWMS for high risk construction work.

News related to this topic

Know your duties - a tool for those working in a labour hire arrangements, now available online

01 Dec 2023 | News

Do you use labour hire?

Read more >

See all news

Further Advice

SWA is not a regulator and cannot advise you about WHS issues in the workplace. If you need help please contact your  state or territory work health and safety authority .

We develop national policy relating to WHS and workers' compensation.

Things to Do in Elektrostal, Russia - Elektrostal Attractions

Things to do in elektrostal.

  • 5.0 of 5 bubbles
  • 4.0 of 5 bubbles & up
  • Good for a Rainy Day
  • Good for Kids
  • Good for Big Groups
  • Adventurous
  • Budget-friendly
  • Hidden Gems
  • Good for Couples
  • Honeymoon spot
  • Good for Adrenaline Seekers
  • Things to do ranked using Tripadvisor data including reviews, ratings, photos, and popularity.

slips and trips

1. Electrostal History and Art Museum

slips and trips

2. Statue of Lenin

slips and trips

3. Park of Culture and Leisure

4. museum and exhibition center.

slips and trips

5. Museum of Labor Glory

slips and trips

7. Galereya Kino

8. viki cinema, 9. smokygrove.

slips and trips

10. Gandikap

11. papa lounge bar, 12. karaoke bar.

  • Statue of Lenin
  • Electrostal History and Art Museum
  • Park of Culture and Leisure
  • Museum and Exhibition Center
  • Museum of Labor Glory

slips and trips

Strange Glow Over Moscow Skies Triggers Panic as Explosions Reported

B right flashes lit up the night sky in southern Moscow in the early hours of Thursday morning, new footage appears to show, following reports of an explosion at an electrical substation on the outskirts of the city.

Video snippets circulating on Russian-language Telegram channels show a series of flashes on the horizon of a cloudy night sky, momentarily turning the sky a number of different colors. In a clip shared by Russian outlet MSK1.ru, smoke can be seen rising from a building during the flashes lighting up the scene.

Newsweek was unable to independently verify the details of the video clips, including when and where it was filmed. The Russian Ministry of Emergency situations has been contacted via email.

Several Russian Telegram accounts said early on Thursday that residents of southern Moscow reported an explosion and a fire breaking out at an electrical substation in the Leninsky district, southeast of central Moscow.

Local authorities in the Leninsky district told Russian outlet RBC that the explosion had happened in the village of Molokovo. "All vital facilities are operating as normal," Leninsky district officials told the outlet.

The incident at the substation in Molokovo took place just before 2 a.m. local time, MSK1.ru reported.

Messages published by the ASTRA Telegram account, run by independent Russian journalists, appear to show residents close to the substation panicking as they question the bright flashes in the sky. One local resident describes seeing the bright light before losing access to electricity, with another calling the incident a "nightmare."

More than 10 villages and towns in the southeast of Moscow lost access to electricity, the ASTRA Telegram account also reported. The town of Lytkarino to the southeast of Moscow, lost electricity, wrote the eastern European-based independent outlet, Meduza.

Outages were reported in the southern Domodedovo area of the city, according to another Russian outlet, as well as power failures in western Moscow. Electricity was then restored to the areas, the Strana.ua outlet reported.

The cause of the reported explosion is not known. A Telegram account aggregating news for the Lytkarino area described the incident as "an ordinary accident at a substation."

The MSK1.ru outlet quoted a local resident who speculated that a drone may have been responsible for the explosion, but no other Russian source reported this as a possible cause.

Ukraine has repeatedly targeted Moscow with long-range aerial drones in recent months, including a dramatic wave of strikes in late May.

On Sunday, Moscow Mayor Sergei Sobyanin said the region's air defense systems had intercepted an aerial drone over the city of Elektrostal, to the east of Moscow. No damage or casualties were reported, he said.

The previous day, Russian air defenses detected and shot down another drone flying over the Bogorodsky district, northeast of central Moscow, Sobyanin said.

There is currently no evidence that an aerial drone was responsible for the reported overnight explosion at the electrical substation in southern Moscow.

Related Articles

  • Russian Soldier Bashes Drone With Shovel After Detonation Failure: Video
  • Russia Headed for Disappointment in Battles Along Dnieper River: UK
  • Ukraine's Military Receives Good News From Multiple NATO Allies

Start your unlimited Newsweek trial

Stills from footage circulating on Telegram early on Thursday morning. Bright flashes lit up the night sky in southern Moscow, new footage appears to show, following reports of an explosion at an electrical substation on the outskirts of the city.

IMAGES

  1. Slips, Trips and Falls: Safety Tips You Need to Know

    slips and trips

  2. Top Causes of Slips, Trips, and Falls in the Workplace

    slips and trips

  3. Slips, trips and falls checklist

    slips and trips

  4. 7 Memorable Slip, Trip, & Fall Videos to Inspire a Culture of Safety

    slips and trips

  5. Slips, Trips, And Falls Hazards

    slips and trips

  6. Top Causes of Slips, Trips, and Falls in the Workplace

    slips and trips

VIDEO

  1. Slips, trips and falls

  2. Slips Trips and Falls

  3. Slips and Trips Course Trailer US

  4. Slips, Trips, and Falls: School

  5. Preventing Slips, Trips, and Falls in the Maritime Industry Preview

  6. clip slips trips

COMMENTS

  1. How to Prevent Slips, Trips, and Falls

    Learn what slips, trips, and falls are, how they cause injuries, and how to prevent them. Find out the statistics, causes, risk factors, and OSHA regulations for these common workplace hazards.

  2. Slips, Trips and Falls

    Learn how to prevent falls at home and at work, the second leading cause of unintentional injury-related death. Find tips, data and resources on ladder safety, fall hazards and fall prevention.

  3. Slips, Trips, and Falls: Preventing Workplace Trip Hazards

    Slips, Trips, and Falls Prevention. Some slip, trip, and fall prevention measures are permanent, including: Adequate lighting. Handrails. Slip-resistant surfaces in high-risk areas. Effective drainage, ventilation, and other methods to keep surfaces dry. Marking the edges of steps or elevation changes.

  4. How to Prevent Workplace Slips, Trips, and Falls [+Checklist]

    Slips, trips, and falls account for over 200,000 workplace injuries per year. In 2020, nearly one in five accidents leading to missed work was due to a slip, trip, or fall. They're also the second-leading cause of workplace fatalities.

  5. Slips, Trips, and Falls: Understanding, Preventing, and Mitigating

    Learn how to identify and avoid hazards that cause slips, trips, and falls, which can lead to severe injuries and costs. Find out how to create a safe environment and educate individuals on how to prevent and mitigate these accidents.

  6. PREVENTING SLIPS, TRIPS, AND FALLS

    Slips, trips, and falls are the second most common cause of workplace injuries in the United States. In this video we look at the causes and prevention and h...

  7. Slips and trips (Labour administration and inspection)

    Learn how to prevent slips and trips, the most common cause of injury at work, with this ILO publication. It provides guidance, case studies, eLearning and resources for employers and workers.

  8. Slips and trips

    Understand what causes slips and trips and how to prevent them. Your role: employers, workers, designers. Find out what you can do in your role to prevent slips and trips. Case studies. Get examples of how others have solved common problems. Resources. Publications, tools, research. Subscribe.

  9. Slips, Trips, and Falls Training: The Basics

    Importance. Slips, trips, and falls are common workplace accidents that can lead to injuries and financial losses for businesses. Most commonly, this training aims to protect lives and comply with safety regulations such as the Occupational Safety and Health Administration ().Proper safety training helps organizations identify and prevent hazards, which protects both of its employees and helps ...

  10. CCOHS: Prevention of Slips, Trips and Falls

    Housekeeping. Good housekeeping is the first and the most important (fundamental) level of preventing falls due to slips and trips. It includes: cleaning all spills immediately. marking spills and wet areas. mopping or sweeping debris from floors. removing obstacles from walkways and always keeping walkways free of clutter.

  11. Fall Prevention: 9 Ways to Avoid Slips, Trips, and Falls

    organizing your home to avoid climbing, stretching, or bending for things. checking any pets are out of your way before walking. avoiding standing or climbing on something to reach an item that is high up. avoiding walking on slippery or recently wet floors, and cleaning up spills immediately.

  12. Causes and prevention

    Learn how to prevent slips and trips at work with the slip potential model and the trip potential triangle. Find out the factors that contribute to slip and trip accidents and the actions to take to avoid them.

  13. Slips, Trips, and Falls toolbox talk

    Learn how to prevent slips, trips and falls in the workplace with this 5-minute outline of what to cover in a toolbox talk. Find out the common causes, solutions and tips to avoid injuries from this hazard.

  14. PDF Slips, Trips & Falls

    Slips, Trips & Falls In 2015, the U.S. Bureau of Labor Statistics reported over 223,000 non-fatal falls on the job. The majority of those falls—149,180—were not from a height or elevation. These workers fell on the same level due to slipping on a slick surface or from tripping over a hazard in the work area. Many of these incidents resulted

  15. Slips, Trips, and Falls

    Slips, trips, and falls are one of the leading causes of injuries and fatalities in the workplace. According to OSHA, slip, trip, and fall incidents cause 15% of all accidental deaths and are second only to motor vehicle incidents as a cause of fatalities on the job. These types of incidents can result in life-changing injuries to the employees ...

  16. PDF Slips Trips Falls Hand out for Safety Committee Meetings

    Slips, trips, and falls cause nearly 700 fatalities per year and many more injurious accident in the workplace according to the Bureau of Labor Statistics. There are three physical factors involved in slips, trips, and falls: friction, momentum, and gravity. Each one plays a role. Friction is the resistance between objects, momentum is affected ...

  17. - Slips, trips and falls

    the wrong footwear. polished, wet or greasy floors. In most cases, people trip on low obstacles that are hard to spot, such as: uneven edges in flooring. loose mats. open drawers. untidy tools, or. electrical cables. Falls can result from a slip or trip, but many occur from low heights.

  18. Occupational Safety and Health Administration

    POPULAR DOWNLOADS. TOPIC. TYPE. LANGUAGES. Your search for slips, trips and falls has returned the following results. Disaster Response: Protecting Workers from Slips, Trips and Falls QuickCard. (OSHA 3907 - 2017) (English: PDF Add to cart ) (OSHA 3907 - 2017) (Spanish: PDF Add to cart ) (OSHA 4301 - 2023) (Chinese Simplified: PDF )

  19. THE 10 BEST Things to Do in Elektrostal

    1. Electrostal History and Art Museum. 2. Statue of Lenin. 3. Park of Culture and Leisure. 4. Museum and Exhibition Center. 5.

  20. Church of the Intercession on the Nerl Review

    View All Trip Ideas The Best Road Trips in America. Log in with user name: Remember Me

  21. Elektrostal to Moscow

    Find all the transport options for your trip from Elektrostal to Moscow right here. Rome2Rio displays up to date schedules, route maps, journey times and estimated fares from relevant transport operators, ensuring you can make an informed decision about which option will suit you best. Rome2Rio also offers online bookings for selected operators ...

  22. Strange Glow Over Moscow Skies Triggers Panic as Explosions Reported

    B right flashes lit up the night sky in southern Moscow in the early hours of Thursday morning, new footage appears to show, following reports of an explosion at an electrical substation on the ...