2013 journey reset oil life

The Mechanic Doctor

Resources for Amateur and Pro Auto Mechanics

How to reset oil life: Dodge Journey 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016.

Click Here to Find a Shop Manual for Your Car!

(Available for Most Makes and Models)

This video will show you step by step instructions on how to reset your oil life indicator on a Dodge Journey 2009-2016.

Instructions:

1-Turn the ignition to run (second position) 2-Press slowly the accelerator pedal all the way down three times within 10 sec. 3-Turn ignition OFF 4-Then turn the ignition to RUN or start the engine to verify if the oil life has been reset.

If you liked this video and found it helpful feel free to like, share, and comment to help us bring even better content. For more oil reset and DIY maintenance tutorials, make sure to subscribe to our channel !

If you didn’t find what you were looking for, send us a message with the model and year of your car and we will get back to you shortly with the best answer we can find.

For any question or suggestion, post a comment below or send us an email to: [email protected]

• ← How to replace the cabin air filter: Hyundai Elantra 2011, 2012, 2013, 2014, 2015.
• How to reset oil life: Chevrolet Equinox 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016. →

Practical Mechanic

Picture guides for home and auto hobby and repair.

Vehicle Maintenance

How to Reset the “Oil Change Due” Light on a Dodge Journey

Here is a super quick guide on how to reset the “Oil Change Due” light in your Dodge Journey!

If you buy through links on my site, I may earn a commission – at no cost to you. Every click helps; thank you for helping me keep this site active!

The “Oil Change Due” light comes on every 5,000-10,000 miles after being reset (depending on type of driving). This is a nice reminder that you need an oil change, but can be a bit annoying as well! Luckily it is very easy to reset this light. It is in the owner’s manual as well, but usually it is easier just to Google the solution! Here are the steps to reset the light.

Oil-Change Supplies:

• Mobil 1 Full-Synthetic 5w-20 Motor Oil
• Mopar Oil Filter – Dodge Journey (2009-2019) (both 4 Cyl 2.4L and 6 Cyl 3.5L)
• Oil Change Kit

Step by Step Instructions:

Reset the “Oil Change Due” Light using these steps:

• Start with the vehicle off. Do not press any foot pedals.
• Press the start button twice to get it to the “On/Run” setting.
• Press the gas pedal all the way to the floor 3 times within 10 seconds.
• Press the start button again to turn the vehicle to the “Off” setting.

Detailed Steps with Pictures:

Start with the car in the off position. Normally you would press the brake with your foot and press the start button. In order to reset the “Oil Change Due” light, DON’T press the brake pedal with your foot.

Simply press the “Start” button twice, slowly, to get it into the “RUN” position.

Once in the “RUN” position, with your foot, press the accelerator pedal (gas pedal) all the way to the floor, then release. Repeat this a total of 3 times within 10 seconds.

Then press the “Start” button again to get it into the “OFF” position.

Now you can go ahead and start the vehicle as you normally would. The “Oil Change Due” light should now be off!

Supplies and Tools to Change Oil:

Thanks for reading. Check of these additional vehicle maintenance tips and tricks !

9 thoughts on “ How to Reset the “Oil Change Due” Light on a Dodge Journey ”

Add Comment

I’d wager those it’s not working for are stoping at the accessory position and not going to the run position. Press the start/stop 2x without your foot on any pedal- the car won’t crank without your foot on the brake. Then press accelerator 3x within 10 seconds then start stop again. It works, I promise!

Thanks for the comment, good tip!

We’ve tried this a million times, different speeds and it isn’t working, any other options?

Hi Michelle, sorry it’s not working for you.

Some other things to consider are that other factors can also play a role. For example, if the headlights are on, it may not work. Also, the emergency brake. Try to think of things like that, that could be affecting it.

Wish I had a better answer for you! Good luck!

Doesn’t work. Tried it 5 different times

Thanks. Very simple to do.

You’re welcome, glad to help!

I have been trying this and it will not go off. I just had an oil change. Is there any other tips on how to get it to turn off

Leave a comment Cancel reply

• Already have a WordPress.com account? Log in now.
• Subscribe Subscribed
• Copy shortlink
• Report this content
• View post in Reader
• Manage subscriptions
• Collapse this bar

How to Reset Oil Life: Dodge Journey 2009-2016

Introduction: How to Reset Oil Life: Dodge Journey 2009-2016

This video will show you step by step instructions on how to reset your oil life indicator on a Dodge Journey 2009-20016

If you liked this video and found it helpful feel free to like, share, and comment to help us bring even better content. For more oil reset and DIY maintenance, make sure to subscribe to our channel!

For any question or suggestion, post a comment below or send us an email to: [email protected]

1-Turn the ignition to run (second position)

2-Press slowly the accelerator pedal all the way down three times within 10 sec.

3-Turn ignition OFF

4-Then turn the ignition to RUN or start the engine to verify if the oil life has been reset.

Recommendations

Making Time Contest

Big and Small Contest

Made with AI - Autodesk Design & Make - Student Contest

Dodge Journey: Reset “Oil Change Due” Light

The “Oil Change Due” light will light up on the Dodge Journey’s dashboard to remind you that you need to change the oil in the vehicle. If you want to clear this light, you can reset it with this quick tutorial.

Note: You can temporarily clear the “Oil Change Due” message by pressing the “Up” arrow button.

2011 – 2020 Models

To reset the message completely, follow these steps:

• Turn the ignition to the “ ON/RUN ” position.
• For push-button start models, press the “ Engine Start/Stop ” button once without holding the brake pedal. Do not start the engine.
• Press the Accelerator all the way down slowly 3 times within a 10-second interval.
• Turn the ignition to “ OFF/LOCK .”
• For push-button start models, press the “ Engine Start/Stop ” button once without holding the brake pedal to turn the electronics off.

If the steps were performed correctly, the “Oil Change Due” light should be reset on your Dodge Journey and no longer appear.

2009 – 2010 Models

• Turn the  key  on. Do NOT start the engine.
• Press the  gas pedal down 3x in 10 seconds.
• Press the Start button to turn off the car.

How often will the “Oil Change Due” light come on?

Dodge only states in their documentation that it varies based on how the vehicle is driven. They do suggest that you absolutely must not let the oil change interval exceed 1 year or 10,000 miles.

What happens if you ignore the change oil light?

If you ignore the change oil light on your vehicle, you risk damaging your engine and decreasing its overall lifespan.

Related posts:

4 thoughts on “dodge journey: reset “oil change due” light”.

You all missed 2 major steps. For push starts, you press TWICE without pressing brake pedal. The car’s run light should be on. You press the acceleration down 3 times as stated. And THEN, while car is still on the run light, you press the Brake and then it should leave.

I followed the steps as shown on my 2018 Journey and it worked perfectly.

I followed these states and it worked perfectly.

For PUSH-BUTTON start models (mine is 2014) ……follow Camille’s correction above.

Thanks Camille for the correction.

Leave a Comment Cancel reply

• Skip to primary navigation
• Skip to main content
• Skip to primary sidebar

Reset Your Oil Change Light

Oil Change Light Reset Procedures

Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015

The Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due.

Below is the Oil Change Light Reset procedure for the Dodge Journey 2009 2010 2011 2012 2013 2014 2015 . Follow the steps below to reset the oil life monitor after each oil change.

Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 Procedure

• Turn the ignition to the “RUN” position.
• Immediately press and release the accelerator pedal 3 times within 10 seconds.
• Turn the ignition off.

Oil Viscosity and Capacity

The 2.4 liter engine holds approximately 4.5 quarts (4.3 liters) of 5W-20 oil when the engine oil and filter are changed.

The 3.5 liter engine holds approximately 5.5 quarts (5.2 liters) of 10W-30 oil when the engine oil and filter are changed.

The 3.6 liter engine holds approximately 5.9 quarts (5.6 liters) of 5W-20 oil when the engine oil and filter are changed.

Not Working?

If the oil change light reset procedure is not working to reset your oil life monitor, make sure you are following each of the steps exactly and in the order displayed in the Oil Change Light Reset Dodge Journey 2009 2010 2011 2012 2013 2014 2015 procedure above. If this is not the oil life monitor reset procedure for your vehicle, restart your oil light reset procedure search HERE

Oil Life Monitor Reset Procedure Frequently Asked Questions

If you are still having trouble with visit the Oil Life Monitor Reset Procedure Frequently Asked Questions (FAQ) page for more information.

Due to the wide range of vehicles makes and models, this is general information and should not be taken as specific to any vehicle. Please consult the vehicle manufacturer for the correct specifications and repair procedures for your vehicle. This information is meant to be used as a guideline only.

Erwin Salarda

Sales and Technical Support : 0915 568 4578

HOW TO RESET: Dodge Journey Oil Change Reminder Reset

Dodge journey oil change due reminder reset.

Easy to follow tutorial on HOW TO RESET the Oil Change Due Reminder Indicator on Dodge Journey (Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE, SE Value, SE/AVP, SXT) from year 2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020.

• Shift the gearbox to  Park Position. 
• Close all doors.
• Push the start button to  RUN Position  (Ignition On) Don’t start the engine.
• Fully depress the GAS PEDAL slowly three times within 10 seconds  Make sure to depress the pedal all the way down.
• Turn the ignition off and start the engine to verify the indicator has been reset.  Repeat this procedure, if the message still illuminates when you start the engine.

Warning:  Reset only the Oil Life after Oil Change.

About Dodge Journey

The Dodge Journey is a mid-size crossover SUV manufactured and marketed by FCA’s Dodge brand since model year 2009, with a facelift for the 2011 model year. With styling by Ryan Nagode, the Journey is marketed globally in both left and right hand drive. In many markets, the SUV was marketed as the Fiat Freemont. (source:wiki)

The 2011 reworking brought a much nicer interior and a better V6, but the lack of agility and still-mediocre fuel economy keep it out of the top ranks. Plus it was more expensive than many better rivals.

• Video Gallery

How to Replace Rear Disc Brakes Pads & Rotors

How to Perform Front Brakes – Demonstrated on a 2005 Nissan…

Simple Alloy Wheel Cleaning Hacks

Video Reset Wrench Service Due Message on 1998-2005 Mercedes ML320

Video Reset Change Engine Oil Light on 2002-2007 Buick Rendezvous

How to diagnose electrical issue with AC compressor

Ask A Mechanic Forum Launched!

Why do automotive mechanics charge so much?

Why does it cost so much to diagnose a check engine…

5 ways of knowing you have a good mechanic

Dodge journey oil change due light reset procedure for model years 2008-2015.

Dodge Journey Oil Change Due Light Reset Procedure for Model Years 2008-2015:

• Without your foot on the brake pedal, press ENGINE START/STOP button to cycle vehicle to ON/RUN mode (make sure engine is OFF)
• Fully depress and release the accelerator pedal 3 times within 10 seconds
• Turn the key to the OFF position and then back on to confirm reset was accepted
• Turn the key to ON/RUN position with engine off

  Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

RELATED ARTICLES MORE FROM AUTHOR

Toyota Tundra Oil Maint Required Message Reset Procedure for Model Years 2005-2015

Lincoln MK Series Oil Change Light Reset Procedure For After Oil Change

Volkswagen Passat Oil Light Reset Procedure for Model Years 1997-2015

No comments, leave a reply cancel reply, stay connected, latest news.

Here’s Why Hyundai is one of the best Cars to Own

Top 5 Best Car Gadgets And Accessories For The Ultimate Road...

Things To Know First Before Buying A Car

Tips for Choosing an Exotic Rental Car

Car How To is proudly powered by WordPress

How to Easily Reset Oil Life on Your 2012 Dodge Journey

If you own a 2012 Dodge Journey, it’s important to keep up with regular maintenance to ensure the longevity and performance of your vehicle. One essential maintenance task is to regularly change the oil and filter to keep the engine running smoothly. After each oil change, you’ll need to reset the oil life indicator on your Dodge Journey to accurately monitor when the next oil change is due. In this article, we’ll guide you through the step-by-step process of resetting the oil life on your 2012 Dodge Journey.

Step 1: Turn the Ignition to the On Position

Before you can reset the oil life on your Dodge Journey, make sure the ignition is in the “ON” position. Do not start the engine.

Step 2: Navigate to the Vehicle Information Menu

Using the controls on your steering wheel, navigate to the “Vehicle Information” menu. This menu allows you to access various settings and information about your vehicle.

Step 3: Select “Oil Life” from the Menu

Scroll through the options in the Vehicle Information menu until you find the “Oil Life” option. Once you’ve located it, select it by pressing the corresponding button on your steering wheel.

Step 4: Reset the Oil Life

After selecting “Oil Life,” a confirmation message will appear asking if you want to reset the oil life. Choose the option to reset the oil life by pressing and holding the reset button on your steering wheel.

Step 5: Confirm the Reset

After holding the reset button, a second confirmation message will appear. Press the button again to confirm the reset and clear the oil life indicator on your Dodge Journey.

Step 6: Verify the Reset

Turn off the ignition and then turn it back on. Navigate back to the “Oil Life” option in the Vehicle Information menu to ensure that the oil life has been reset to 100%. If the reset was successful, the indicator should display a full oil life.

Frequently Asked Questions Of How To Easily Reset Oil Life On Your 2012 Dodge Journey

How do i reset the oil life on my 2012 dodge journey.

To reset the oil life on your 2012 Dodge Journey, follow these easy steps:

Can I Reset The Oil Life Without Going To A Mechanic?

Absolutely! You can reset the oil life on your 2012 Dodge Journey without visiting a mechanic. Just follow these simple instructions:

What Happens If I Don’t Reset The Oil Life On My Dodge Journey?

If you don’t reset the oil life on your Dodge Journey, the maintenance reminder will keep alerting you to change the oil even if it’s already been done. It’s important to reset it to ensure accurate notifications.

How Often Should I Reset The Oil Life On My Dodge Journey?

It’s recommended to reset the oil life on your Dodge Journey after every oil change. This ensures accurate tracking of your vehicle’s maintenance schedule.

Regularly changing the oil and resetting the oil life indicator is crucial to maintaining the health of your 2012 Dodge Journey’s engine. By following the simple steps outlined in this guide, you can easily reset the oil life to ensure accurate monitoring of when your next oil change is due. Remember to always consult your vehicle’s manual for any specific instructions related to your make and model.

Related posts:

• How to Quickly Reset Oil Change Light on Dodge Journey: Step-by-Step Guide
• How to Quickly Reset 2018 Dodge Journey Oil Light: Expert Guide
• How to Quickly Reset Oil Change Light in Dodge Journey: Expert Tips
• How to Easily Reset Dodge Journey Oil Change Light: Complete Guide

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

• Schedule an Appointment

Oil Changes for 2013 Dodge Journey

Get an oil change.

• Find A Store

Get Your Dodge Journey Oil Changed

Give your Journey’s engine a little TLC with routine oil changes. Schedule your next appointment today.

2013 Dodge Journey Maintenance Schedule

What is the manufacturer-recommended maintenance schedule for a 2013 Dodge Journey? Find maintenance info for your vehicle.

• 10,000 miles
• 20,000 miles
• 30,000 miles
• 40,000 miles
• 50,000 miles
• 60,000 miles
• 70,000 miles
• 80,000 miles
• 90,000 miles
• 100,000 miles
• 110,000 miles
• 120,000 miles
• 130,000 miles
• 140,000 miles
• 150,000 miles

10,000 Miles

Maintenance check at 10000 miles for your 2013 Dodge Journey SE

• REPLACE Engine Oil & Filter
• RESET Oil Life System

20,000 Miles

Maintenance check at 20000 miles for your 2013 Dodge Journey SE

30,000 Miles

Maintenance check at 30000 miles for your 2013 Dodge Journey SE

40,000 Miles

Maintenance check at 40000 miles for your 2013 Dodge Journey SE

50,000 Miles

Maintenance check at 50000 miles for your 2013 Dodge Journey SE

60,000 Miles

Maintenance check at 60000 miles for your 2013 Dodge Journey SE

70,000 Miles

Maintenance check at 70000 miles for your 2013 Dodge Journey SE

80,000 Miles

Maintenance check at 80000 miles for your 2013 Dodge Journey SE

90,000 Miles

Maintenance check at 90000 miles for your 2013 Dodge Journey SE

100,000 Miles

Maintenance check at 100000 miles for your 2013 Dodge Journey SE

110,000 Miles

Maintenance check at 110000 miles for your 2013 Dodge Journey SE

120,000 Miles

Maintenance check at 120000 miles for your 2013 Dodge Journey SE

130,000 Miles

Maintenance check at 130000 miles for your 2013 Dodge Journey SE

140,000 Miles

Maintenance check at 140000 miles for your 2013 Dodge Journey SE

150,000 Miles

Maintenance check at 150000 miles for your 2013 Dodge Journey SE

Maintenance check at 10000 miles for your 2013 Dodge Journey AVP

Maintenance check at 20000 miles for your 2013 Dodge Journey AVP

Maintenance check at 30000 miles for your 2013 Dodge Journey AVP

Maintenance check at 40000 miles for your 2013 Dodge Journey AVP

Maintenance check at 50000 miles for your 2013 Dodge Journey AVP

Maintenance check at 60000 miles for your 2013 Dodge Journey AVP

Maintenance check at 70000 miles for your 2013 Dodge Journey AVP

Maintenance check at 80000 miles for your 2013 Dodge Journey AVP

Maintenance check at 90000 miles for your 2013 Dodge Journey AVP

Maintenance check at 100000 miles for your 2013 Dodge Journey AVP

Maintenance check at 110000 miles for your 2013 Dodge Journey AVP

Maintenance check at 120000 miles for your 2013 Dodge Journey AVP

Maintenance check at 130000 miles for your 2013 Dodge Journey AVP

Maintenance check at 140000 miles for your 2013 Dodge Journey AVP

Maintenance check at 150000 miles for your 2013 Dodge Journey AVP

Maintenance check at 10000 miles for your 2013 Dodge Journey R/T

Maintenance check at 20000 miles for your 2013 Dodge Journey R/T

Maintenance check at 30000 miles for your 2013 Dodge Journey R/T

Maintenance check at 40000 miles for your 2013 Dodge Journey R/T

Maintenance check at 50000 miles for your 2013 Dodge Journey R/T

Maintenance check at 60000 miles for your 2013 Dodge Journey R/T

Maintenance check at 70000 miles for your 2013 Dodge Journey R/T

Maintenance check at 80000 miles for your 2013 Dodge Journey R/T

Maintenance check at 90000 miles for your 2013 Dodge Journey R/T

Maintenance check at 100000 miles for your 2013 Dodge Journey R/T

Maintenance check at 110000 miles for your 2013 Dodge Journey R/T

Maintenance check at 120000 miles for your 2013 Dodge Journey R/T

Maintenance check at 130000 miles for your 2013 Dodge Journey R/T

Maintenance check at 140000 miles for your 2013 Dodge Journey R/T

Maintenance check at 150000 miles for your 2013 Dodge Journey R/T

Maintenance check at 10000 miles for your 2013 Dodge Journey SXT

Maintenance check at 20000 miles for your 2013 Dodge Journey SXT

Maintenance check at 30000 miles for your 2013 Dodge Journey SXT

Maintenance check at 40000 miles for your 2013 Dodge Journey SXT

Maintenance check at 50000 miles for your 2013 Dodge Journey SXT

Maintenance check at 60000 miles for your 2013 Dodge Journey SXT

Maintenance check at 70000 miles for your 2013 Dodge Journey SXT

Maintenance check at 80000 miles for your 2013 Dodge Journey SXT

Maintenance check at 90000 miles for your 2013 Dodge Journey SXT

Maintenance check at 100000 miles for your 2013 Dodge Journey SXT

Maintenance check at 110000 miles for your 2013 Dodge Journey SXT

Maintenance check at 120000 miles for your 2013 Dodge Journey SXT

Maintenance check at 130000 miles for your 2013 Dodge Journey SXT

Maintenance check at 140000 miles for your 2013 Dodge Journey SXT

Maintenance check at 150000 miles for your 2013 Dodge Journey SXT

Maintenance check at 10000 miles for your 2013 Dodge Journey Crew

Maintenance check at 20000 miles for your 2013 Dodge Journey Crew

Maintenance check at 30000 miles for your 2013 Dodge Journey Crew

Maintenance check at 40000 miles for your 2013 Dodge Journey Crew

Maintenance check at 50000 miles for your 2013 Dodge Journey Crew

Maintenance check at 60000 miles for your 2013 Dodge Journey Crew

Maintenance check at 70000 miles for your 2013 Dodge Journey Crew

Maintenance check at 80000 miles for your 2013 Dodge Journey Crew

Maintenance check at 90000 miles for your 2013 Dodge Journey Crew

Maintenance check at 100000 miles for your 2013 Dodge Journey Crew

Maintenance check at 110000 miles for your 2013 Dodge Journey Crew

Maintenance check at 120000 miles for your 2013 Dodge Journey Crew

Maintenance check at 130000 miles for your 2013 Dodge Journey Crew

Maintenance check at 140000 miles for your 2013 Dodge Journey Crew

Maintenance check at 150000 miles for your 2013 Dodge Journey Crew

How Often to Change 2013 Dodge Journey Oil

Not sure how or where to get your Dodge Journey’s oil changed? Get the advice you need at Firestone Complete Auto Care! Our expertise goes beyond tires. Oil and lube services are also our specialties. After all, like our maintenance technician Brianna says, “Oil is the blood of the engine. It’s the #1 thing you can do for your car.”

Your 2013 Journey’s oil should be changed according to Dodge’s recommended oil change intervals. See mileage and month specifics in the above table. Your Journey may need an oil change right away if your check engine/oil change light is on, you hear engine knocking, smell oil inside the vehicle, or notice excess vehicle exhaust. You might need an oil change more frequently than what’s recommended by Dodge if you regularly haul heavy loads, frequent dusty roads, go off-roading a lot, or drive at low speeds for long distances. In general, being extra-diligent about oil changes won’t damage your Dodge Journey. Each oil change is actually another chance to check and resolve other car issues, such as worn brake pads or tire treads.

What Kind of Oil Should I Get for My Dodge Journey?

Whether it’s synthetic, conventional, or a blend of both — your local Firestone Complete Auto Care has the right oil for your Dodge Journey. Dodge has specifically identified either synthetic or conventional as the best oil for 2013 Dodge Journey vehicles. Motor oil reduces friction between engine components, regulate engine temperature, and prevent the build-up of harmful substances within the engine. In an oil change service, one of our techs will change your Journey’s oil, replace and recycle the old oil and filter, check all of your other filters, top-off essential fluids, and visually inspect the rest of the vehicle. You can rest assured knowing that we seek to do what’s best for your Journey by considering your driving style, and mileage.

Types of Motor Oil for Dodges

Wondering if we carry the right motor oil for your Dodge? We stock outstanding motor oils because that's what your engine deserves. Talk with a teammate and consult your owner's manual before picking a motor oil. At Firestone Complete Auto Care, you can choose from the following oils: Quaker State® Advanced Durability™ conventional oil, Pennzoil® High Mileage Vehicle® motor oil, Pennzoil Platinum® Full Synthetic motor oil with PurePlus™ Technology, and Shell Rotella® heavy-duty engine oil. There are plenty of motor oils on the market today, so why do we prefer these brands? They are proven winners. For instance, Quaker State was shown to provide 2x more protection than the industry standard when tested in taxi fleets across the country. [1] And Pennzoil? Pennzoil Synthetics are the most technologically advanced, fully formulated motor oils available and exceed current industry and manufacturer requirements. For heavy-duty engines, there's Shell Rotella. It's made for gasoline and diesel engines that need to withstand rugged conditions, and is fortified to deliver heightened performance in extreme temperatures, increased wear protection, and better oxidation resistance. For help picking the correct motor oil for your 2013 Dodge Journey, refer to Dodge's recommendations first.

Where to Get an Oil Change for Dodge Journey

When it's time for a 2013 Dodge Journey oil change, you’ll know where to get it. Your local Firestone Complete Auto Care has some of the best motor oil for Dodge Journeys. We’ve got convenient appointment times to take care of you, with the right oil at the right price. To find out how much a 2013 Journey oil change costs, call ahead. Get professional engine care by making an oil change appointment for your Journey today. For your convenience, many of our stores are open late and on weekends!

[1] ILSAC GF-5 represents the latest performance standard set by the International Lubricant Standardization and Approval Committee (ILSAC), a joint effort of U.S. and Japanese automobile manufacturers. Most automobile manufacturers are expected to recommend oils that meet ILSAC GF-5. API SN is the most recent service category issued by API’s Lubricants Group. Oils meeting API SN and the new “Resource Conserving” designation meet all ILSAC GF-5 performance requirements.

Oil Change Q&A for Your 2013 Dodge Journey

• Why check the motor oil level in my Dodge Journey? Engine oil lubricates moving parts in your engine. If your oil runs low, these parts can grind together, overheat, and cause your Dodge Journey engine to fail. That’s why it’s best to check your oil levels and get your oil changed regularly.
• How hard is it to change Dodge Journey oil at home? Changing your own oil isn't as convenient as you might think. It requires special tools and old oil must be disposed of properly. Having your oil changed professionally can not only reduce the risk of something going wrong during the service, but also help your car perform down the road.
• Why is my Dodge Journey exhaust smoke grayish or blue? Your engine could be burning oil due to a leak. It may be time for a pro to take a look. The leak could be the result of worn valve seals, damaged piston rings, or damaged cylinder walls.
• Where can I get Dodge Journey oil changes? Firestone Complete Auto Care performs Dodge Journey oil changes and more! Our technicians also replace oil filters, troubleshoot oil leaks, and advise on the right oil for your ride.
• What does it mean if my Dodge Journey oil light comes on? Your Dodge Journey oil change reminder light might illuminate if it’s been too long since your last oil change. On the other hand, the oil pressure light might illuminate due to a clogged oil filter, a faulty oil pressure sensor, low engine oil levels, or a malfunctioning oil pump.
• Do I need to replace my Journey’s oil filter when changing my oil? Every time you change the oil in your Dodge Journey, you should also replace the oil filter. Otherwise, you risk contaminating your brand-new oil with the dirt and debris built up in your old filter.

2018 Dodge Journey Reset Oil Light: Quick and Easy Guide

Last Updated on September 30, 2023 by Albert Duke

To reset the oil light on a 2018 Dodge Journey, start the vehicle and turn it off three times in a row. Are you looking for a simple and effective way to reset the oil light on your 2018 Dodge Journey?

Well, you’re in luck! We will provide you with a step-by-step guide on how to reset the oil light on your Dodge Journey. It’s important to reset the oil light to ensure that your vehicle operates at its optimum performance and to remind you when it’s time to change your oil.

By following our instructions, you’ll be able to reset the oil light on your 2018 Dodge Journey in no time, saving you both time and money. So, let’s get started!

Understanding The “Oil Change Due” Light On Your Dodge Journey

To understand the “Oil Change Due” light on your 2018 Dodge Journey, check out helpful videos on YouTube or visit websites like HiRide and Practical Mechanic for step-by-step instructions on how to reset the oil light. This will ensure that you stay informed and maintain your vehicle’s performance.

What Is The “Oil Change Due” Light?

• The “Oil Change Due” light is an indicator that illuminates on the dashboard of your Dodge Journey to remind you that it’s time for an oil change.
• This light serves as a helpful tool to ensure the proper maintenance and longevity of your vehicle’s engine.
• The light typically appears after a set number of miles or a specific duration has passed since your last oil change.

Why Does It Light Up?

• The “Oil Change Due” light lights up to notify you that the oil in your Dodge Journey needs to be changed.
• This light is triggered by the vehicle’s internal computer system, which monitors various factors such as mileage, engine operating conditions, and the type of oil used.
• Once the predetermined threshold is reached, the light is activated to let you know that it’s time for an oil change.

Importance Of Regular Oil Changes

• Regular oil changes are crucial for maintaining the overall health and performance of your Dodge Journey.
• Oil acts as a lubricant for the internal components of the engine, reducing friction and preventing excessive wear and tear.
• By regularly changing the oil, you ensure that your engine’s parts are properly lubricated, allowing them to function smoothly and efficiently.
• Regular oil changes also help to remove dirt, debris, and contaminants that can accumulate in the oil over time, preventing potential damage to your engine.
• Additionally, fresh oil helps to regulate the temperature of the engine, ensuring that it remains within a safe operating range.
• Neglecting regular oil changes can result in reduced engine performance, increased fuel consumption, and even engine failure.

Remember, staying on top of your Dodge Journey’s oil change schedule is essential for keeping your vehicle in optimal condition. Make sure to heed the “Oil Change Due” light and consult your vehicle’s owner’s manual for specific recommendations on oil change intervals.

How To Reset The “Oil Change Due” Light On Your Dodge Journey

To reset the “Oil Change Due” light on your 2018 Dodge Journey, simply follow these steps: switch the car to the RUN position, fully depress the GAS PEDAL three times, and turn off the vehicle. It’s an easy process to keep your oil change reminder in check.

Step 1: Start The Engine

To begin the process of resetting the “Oil Change Due” light on your Dodge Journey, follow these simple steps:

• Start the engine of your vehicle.

Step 2: Access The Vehicle Settings

Once the engine is running, you will need to access the vehicle settings on your Dodge Journey. Here’s how:

• Locate the control panel or dashboard of your vehicle.
• Look for a button or a series of buttons that are designated for accessing the settings menu.

Step 3: Locate And Select The “Oil Life” Option

After accessing the vehicle settings, you will need to navigate to the “Oil Life” option in order to reset the oil change reminder. Here’s how:

• Use the buttons on the control panel to scroll through the menu options until you find the “Oil Life” option.
• Once you have located the “Oil Life” option, select it by pressing the corresponding button.

Step 4: Reset The Oil Change Reminder

Now that you have selected the “Oil Life” option, you can proceed to reset the oil change reminder on your Dodge Journey. Follow these final steps:

• Within the “Oil Life” menu, look for the option that allows you to reset the reminder.
• Select the reset option by pressing the corresponding button.
• Make sure to confirm the reset by following any additional prompts or instructions that may appear on the control panel.

By following these steps, you should be able to successfully reset the “Oil Change Due” light on your Dodge Journey. Remember to consult your vehicle’s manual or contact a professional if you encounter any issues or need further assistance.

Alternative Methods For Resetting The “Oil Change Due” Light

To reset the “Oil Change Due” light on a 2018 Dodge Journey, there are alternative methods available. One method is to switch the car to the RUN position, fully depress the gas pedal three times, and then turn off the vehicle.

Another method is to watch instructional videos on platforms like YouTube to learn step-by-step instructions on manually resetting the oil light.

Method 1: Using The Trip Meter

• Start the engine and make sure the vehicle is in park.
• Locate the trip meter button on the dashboard.
• Press and hold the trip meter button until the oil change light begins to flash.
• Release the button and then quickly press and hold it again until the light turns off.
• Turn off the engine and then turn it back on to confirm that the oil change light has been reset.

Method 2: Disconnecting The Battery

• Park the vehicle and turn off the engine.
• Locate the negative battery terminal.
• Use a wrench or pliers to loosen the nut on the negative battery terminal.
• Disconnect the negative battery terminal and wait for 10-15 minutes.
• Reconnect the negative battery terminal and start the engine to check if the oil change light has been reset.

Method 3: Using A Scan Tool

• Locate the OBD-II port, usually underneath the dashboard on the driver’s side.
• Plug the scan tool into the OBD-II port.
• Turn on the scan tool and follow the manufacturer’s instructions to reset the oil change light.
• Once the light has been reset, disconnect the scan tool and start the engine to ensure that the light no longer appears.

Remember, it is important to regularly change the oil in your Dodge Journey to keep the engine running smoothly and maintain its overall performance. If you are unsure how to reset the oil change light or prefer to have a professional handle it, don’t hesitate to reach out to your local Dodge dealership or mechanic.

Tips For Maintaining Your Dodge Journey’S Oil Life

To reset the oil light on your 2018 Dodge Journey, follow these simple steps. First, switch the car to the RUN position. Then, fully depress the gas pedal three times. Finally, turn off the car and the oil light will be reset.

Checking the oil level regularly:

• Park your Dodge Journey on a level surface and wait for the engine to cool down.
• Locate the oil dipstick, usually labeled with a yellow handle, and pull it out.
• Wipe the dipstick clean with a cloth and then reinsert it back into the dipstick tube.
• Remove the dipstick again and check the oil level. It should be between the “min” and “max” markers.
• If the oil level is low, add the recommended type of oil until it reaches the proper level.

Choosing the right type of oil:

• Refer to your Dodge Journey’s owner’s manual to find the recommended oil viscosity and performance rating.
• Look for oils that meet or exceed the manufacturer’s specifications.
• Consider factors like climate, driving conditions, and your vehicle’s age when choosing the appropriate oil type.
• Synthetic oils offer better protection and performance, especially in extreme temperatures and high-stress driving situations.
• Consult with a professional mechanic or refer to trusted online resources for guidance in selecting the best oil for your Dodge Journey.

Following the recommended oil change intervals:

• Regularly changing the oil in your Dodge Journey is crucial for maintaining its engine’s performance and longevity.
• Check your vehicle’s owner’s manual to find the manufacturer’s recommended oil change interval.
• Typically, conventional oil needs to be changed every 3,000 to 5,000 miles, while synthetic oil can last up to 10,000 miles.
• Adhering to the recommended interval ensures that your engine receives clean and properly lubricated oil, maximizing its efficiency and preventing premature wear and tear.

By following these tips for maintaining your Dodge Journey’s oil life, you can keep your engine running smoothly and protect its longevity. Regularly checking the oil level, choosing the right type of oil, and following the recommended oil change intervals are essential steps in ensuring optimal performance and efficiency for your vehicle.

Remember to consult your owner’s manual and seek professional guidance whenever necessary to keep your Dodge Journey in top shape.

Frequently Asked Questions About Resetting The Oil Light On A Dodge Journey

To reset the oil light on a 2018 Dodge Journey, switch the car to the RUN position, fully depress the gas pedal three times, and turn off the vehicle. This quick and easy procedure will clear the “Oil Change Due” light on your dashboard.

How Often Should I Reset The Oil Change Reminder?

• Once you have performed an oil change on your Dodge Journey, you should reset the oil change reminder. This will ensure that the reminder accurately reflects the next oil change interval.
• It is recommended to reset the oil change reminder after each oil change so that you can easily keep track of when the next oil change is due.

Can I Reset The Oil Light Without Changing The Oil?

• No, it is not recommended to reset the oil light on your Dodge Journey without actually changing the oil.
• The oil light serves as a reminder to change the oil, indicating that the oil has reached the end of its useful life. Resetting the oil light without changing the oil can lead to engine damage and potential breakdowns.
• It is crucial to adhere to the manufacturer’s recommended maintenance schedule and change the oil regularly to maintain the performance and longevity of your vehicle.

What Should I Do If The Oil Change Light Keeps Coming On?

• If the oil change light on your Dodge Journey keeps coming on even after you have changed the oil, there are a few steps you can take to resolve the issue:
• Check the oil level: Ensure that the oil level is correct by using the dipstick. Add oil if necessary.
• Inspect for leaks: Look for any signs of oil leaks, such as puddles under your vehicle or oily residue on the engine. If you identify a leak, it is essential to address it promptly.
• Consult a professional: If you have followed the above steps and the oil change light still persists, it is recommended to consult a certified mechanic or bring your vehicle to a Dodge dealership. They can diagnose and resolve any underlying issues causing the oil change light to illuminate.

Remember, regular oil changes are vital for the health of your engine, so it’s crucial to address any issues related to the oil change light promptly.

Credit: m.youtube.com

Frequently Asked Questions On 2018 Dodge Journey Reset Oil Light

How to reset check engine light after oil change dodge journey.

To reset the check engine light after an oil change in a Dodge Journey, follow these steps: 1. Start the vehicle. 2. Turn off the vehicle. 3. Repeat steps 1 and 2 three times. 4. The check engine light should be reset.

How To Turn Off The Oil Change Message On A 2017 Dodge Journey?

To turn off the oil change message on a 2017 Dodge Journey, follow these steps: 1. Start the vehicle. 2. Press the gas pedal fully three times. 3. Turn off the vehicle. 4. The oil change message should now be cleared.

Note: These steps may vary slightly depending on the model and year of your Dodge Journey.

How Do You Manually Reset The Oil Light?

To manually reset the oil light on your vehicle, follow these steps: 1. Switch the car to the “RUN” position. 2. Fully depress the gas pedal three times. 3. Turn off the vehicle. 4. The oil light should now be reset.

How Do You Reset The Oil Life Warning?

To reset the oil life warning on a Dodge Journey, follow these steps: 1. Start the vehicle and let it idle. 2. Fully depress the gas pedal three times. 3. Turn off the vehicle. 4. That’s it! The oil life warning should now be reset.

In this blog post, we discussed the importance of resetting the oil light on a 2018 Dodge Journey. We provided step-by-step instructions on how to reset the oil light, as well as resources such as YouTube videos and guides from reputable sources.

It is crucial to reset the oil light to ensure proper maintenance of your vehicle and avoid any potential damages. By following the instructions provided in this blog post, you can easily reset the oil light and keep your Dodge Journey running smoothly.

Remember to switch the car to the RUN position, fully depress the gas pedal three times, and turn off the vehicle. Clearing the oil change due light is a simple but necessary task to ensure the longevity of your car’s engine.

Stay on top of your vehicle’s maintenance by resetting the oil light on your 2018 Dodge Journey today.

View all posts

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

2020 Lomita Blvd,  Torrance, CA 90101 United States

Proudly powered by WordPress

OilReset.com Blog

2016 dodge journey oil life reset.

To reset the 2016 Dodge Journey oil life after an oil change, please follow these instructions:

1. turn the ignition to run (one position before starting engine). 2. fully depress the accelerator pedal slowly three times within 10 seconds. 3. turn the ignition off and then start the engine to verify the indicator has been reset., related posts, wax vs. ceramic coating: which is better for your car’s paint.

When it comes to protecting your car’s paint there are 2 popular and easy-to-use products you can choose, car wax and ceramic coating. Car wax…

2002 Mercedes-Benz E 55 AMG Service Light Reset

The 2002 Mercedes-Benz E 320 service light or Flexible Service System (FSS) indicates when the vehicle is due for a Service A or Service B.…

2002 Mercedes-Benz E 430 Service Light Reset

2002 mercedes-benz e 320 service light reset, 2015 ford f-250 oil life reset instructions.

The Ford F-250 Oil Life Reset is performed when the vehicle has an oil change. The oil change intervals are based on how you drive,…

2021 Dodge Ram 1500 Oil Life Reset

Your vehicle’s engine oil change indicator system is a feature that helps you keep track of when your engine oil needs to be changed. This…

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

News and information from the automotive industry

Saturday Service

Vehicle Reviews

Cabin Filters

Friday Gadgets

Instructions.

Launching soon.  Signup for updates.

Members Only

• Forum Listing
• Marketplace
• Advanced Search
• General, Performance, and Technical
• General Challenger Discussion
• How-To, DIY and Tips & Tricks

2013 Oil Life Reset

• Add to quote

I did my first oil change on my 2013 RT before the oil change message came up. I have attempted numerous times to reset the oil life monitor but I can not get any confirmation that it is reset. I pushed the start button twice, then pushed the gas peddle to the floor 3 times and then pushed the start button again to turn the ignition off. No confirmation message comes up on the EVIC.  

I've changed my oil three times with a full synthetic. I have 8000 miles on my 2012 and have not had to reset the oil message light bc it has never come on. Sent from AutoGuide.com Free App  

The oil message hasn't come up on mine either. However, since I have changed the oil, I wanted the reset the oil life monitor so it can start a new duty cycle. Still no oil change message after 8000 miles? Maybe it will show after 10k.  

After a reset on my '10 R/TC, I don't get a message..............but the "oil change" message will quit appearing, along with the "ding" No confirmation message on '10's anyways.  

See if this helps: Pages 235-236, 2013 R/T Owners Manual Engine Oil Change Indicator System Oil Change Required Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position or cycle the ignition to the ON/RUN position if equipped with Keyless Enter-N-Go™. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) refer to the following procedure. Vehicles Equipped With Keyless Enter-N-Go™ 1. Without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (Do not start the engine.) 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Without pressing the brake pedal, push the ENGINE START/STOP button once to return the ignition to the OFF/LOCK position. Vehicles Not Equipped With Keyless Enter-N-Go™ 1. Turn the ignition switch to the ON/RUN position (Do not start the engine.) 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Turn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.  

Thank you, Robo. Found that in the manual and did it. Just didn't get any confirmation that it took.  

• ?            
• 94.8K members

Top Contributors this Month

2013 Ram 1500 Reset Oil Life

In order to reset the oil life indicator on a 2013 Ram 1500, begin by turning the key in the ignition to position two. Then press and hold down both accelerator pedal buttons simultaneously for 10 seconds. After this time has elapsed, release both pedals and turn off the ignition. Once these steps have been completed, you should notice that the oil life indicator is now reset back to 100%. It is important to note that this reset procedure may vary slightly depending on your vehicle’s model and year of production. Therefore it is always recommended that you consult your owner’s manual before attempting any type of maintenance or service work on your vehicle.

The 2013 Ram 1500 is equipped with an oil life monitoring system that can be reset after changing the oil. When the monitor indicates that it’s time to change your engine oil, you’ll need to reset the system in order for it to start tracking your vehicle again. Resetting the oil life of your Ram 1500 is a simple process and can be done in just a few minutes.

2013 Ram 1500 Oil Light Reset

How Do You Reset Oil Life on 2013 Dodge Ram 1500?

Resetting the oil life on a 2013 Dodge Ram 1500 is an important part of regular maintenance and something that should be done every time you change your oil. To reset the oil life, first make sure the ignition switch is turned off. Then press and hold down both of the accelerator and brake pedals for 5 seconds or until you hear a chime. This will turn on a warning light in your dashboard display showing “OIL LIFE” with 100% displayed. Now release both pedals, then press and hold them again for another 5 seconds to confirm the setting has been changed. Once this process is complete, your new oil life calibration has been set to 100%. It’s important to note that even though you’ve successfully reset the oil life gauge, it doesn’t mean you don’t need to get an oil change anymore; it just means that when it does come time for one, you’ll know exactly where you stand with respect to remaining oil life before needing a replacement.

How Do You Reset the Oil Life on a Dodge Ram 1500?

Resetting the oil life on a Dodge Ram 1500 is an easy process that can be done in just a few steps. First, turn off your engine and make sure all doors are closed. Next, press and hold both the accelerator pedal and brake pedal for at least 10 seconds. Once you have held down the pedals for this duration of time, release them both simultaneously. Then start your vehicle again while holding down the odometer reset button until “Change Oil” appears on the display screen. Finally, push the odometer reset button once more to confirm that you want to reset it. This will clear out any old data from previous oil changes so that you can keep track of how long each new oil change should last before needing another one done.

How Do You Reset the Messages on a 2013 Dodge Ram?

If you are looking to reset the messages on a 2013 Dodge Ram, there is an easy way to do so. First, locate the odometer/trip button located on the dashboard below your steering wheel. Hold down this button for more than 10 seconds until all of the gauges in your dash will cycle through their self-test cycle and then return back to their original position. Once that has happened, you can release the odometer/trip button and immediately press it again for another few seconds until a message appears on your instrument cluster saying “Reset Complete”. This means that all of your stored messages have been cleared from memory and now you should be able to view any new ones without interference from old notifications.

How Do You Reset the Oil Life on a 2014 Dodge Ram 1500?

If you own a 2014 Dodge Ram 1500, then at some point you’ll need to reset the oil life on your vehicle. Fortunately, this process is simple and can be done in just a few steps. First, make sure your vehicle is off and that all doors are closed. Next, turn the ignition key to the “On/Run” position without starting the engine. This will cause the message center display to appear on your dashboard. Then press and hold down both of the accelerator and brake pedals for five seconds until a message appears stating “Oil Life Reset Complete!” Finally, release both pedals and restart your engine; this should complete your oil life reset process on your 2014 Dodge Ram 1500!

Credit: www.blauparts.com

How to Reset Oil Life on 2013 Ram 2500

If you need to reset the oil life on your 2013 Ram 2500, you can do so by turning off the ignition, pressing and holding down the odometer display button while turning on the ignition again. After a few seconds, an “OIL LIFE RESET” message will appear on the instrument cluster. Release and press the button once more to confirm that you want to reset the oil life. The light should then turn off indicating successful completion of this process.

2014 Ram 1500 Oil Reset

The 2014 Ram 1500 has a useful feature for drivers who like to keep up with their vehicle’s maintenance schedule. The oil reset feature allows owners of the Ram 1500 to easily reset their truck’s oil life indicator after changing the engine oil and filter. This makes it easier to stay on top of regular maintenance and helps ensure that your truck runs smoothly.

How to Reset Oil Life on 2012 Ram 1500

If you own a 2012 Ram 1500, resetting the oil life is easy and can be done in a few simple steps. First, turn your ignition switch to the “On” position without starting the engine. Then press and hold down both accelerator pedal positions for two or three seconds until the Oil Life indicator appears on the dashboard display screen. Release both pedals and use your left arrow button to scroll through options until you get to “Oil Life Reset,” then select it with your right arrow key. Once selected, confirm that you want to proceed by pressing the check mark icon located at the bottom of your display screen. The oil life should now be reset!

In conclusion, resetting the oil life on a 2013 Ram 1500 is a straightforward process that can be completed in just a few easy steps. It’s important to reset your vehicle’s oil life after each oil change to ensure your engine gets the proper lubrication it needs and you get the best performance from your vehicle. Resetting the oil life indicator also helps you keep track of when it’s time for another maintenance check or oil change so you don’t miss any important service intervals. Taking care of your vehicle is an important part of owning one and by following these simple instructions, you can ensure that your 2013 Ram 1500 will continue running smoothly for many years to come.

Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

View all posts

Similar Posts

2015 Ram 1500 Oil Filter Location

The oil filter on a 2015 Ram 1500 is located at the bottom of the engine,…

2019 Ram 1500 Battery Replacement

The battery on a 2019 Ram 1500 can be replaced using the following steps. First, you…

12.7 60 Series Detroit Head Bolt Torque Specs

The 12.7 liter 60 Series Detroit Diesel engine head bolt torque specifications are as follows: The…

Dodge Ram 2500 Abs Problems

The Dodge Ram 2500 is a popular pickup truck, but some owners have reported experiencing ABS…

Dodge Ram 1500 Jack Stand Location

To safely and easily jack up a Dodge Ram 1500, it is important to locate the…

2006 Dodge Ram Fuse Box Location

The 2006 Dodge Ram 1500 fuse box is located under the hood on the driver’s side….

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.