temperature trip amplifier

• Calibration
• Request for RMA

Universal Temperature Converter and Trip Amplifier - D1073S

• Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2
• mV, thermocouples, RTD or transmitting potentiometers Input Signal
• Programmable RTD line resistance compensation
• Reference Junction Compensation automatic or fixed (programmable value)
• 0/4-20mA, 0/1-5 V, 0/2-10 V Output Signal temperature linear or reverse
• 16 characters tag
• Two independent trip amplifiers
• Output for burnout detection.
• Common burnout detection available when using Power Bus enclosure
• High Accuracy, μP controlled A/D converter
• Three port isolation, Input/Output/Supply
• EMC Compatibility to EN61000-6-2, EN61000-6-4
• Fully programmable operating parameters
• Simplified installation using standard DIN Rail and plug-in terminal blocks
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

The single channel DIN Rail Temperature Signal Converter and Trip Amplifier D1073S accepts a low level dc signal from millivolt, thermocouple or RTD temperature sensor, located in Hazardous Area, and converts, with isolation, the signal to drive a Safe Area load.

Output signal can be direct or reverse. Two independent Alarm Trip Amplifiers are also provided. Each alarm energizes, or de-energizes, an SPST relay for high, low, low-startup or burnout alarm functions. The two alarm relays trip points are settable over the entire input signal range.

No Product Accessories.

Configurations

Related products.

Repeater Power Supply / Analog Signal Converter and Trip Amplifiers

Frequency-Pulse Converter, Repeater and Trip Amplifier

TX Repeater, Power Supply, and Trip Amplifier

Define Instruments Sentry Trip Amplifier

Accepts universal input signal types, offers two relay outputs for alarming, and optional 4-20ma output..

• By Define Instruments
• FREE Ground Shipping on orders of $1,000 or more
• FREE Lifetime Tech Support
• Some models in stock. View available part numbers.
• mA, V, RTD, TC, NPN/PNP, potentiometer, & AC inputs
• 0 or 4 to 20mA or 0 to 10V output optional
• Useful for commissioning & fault finding
• 24 to 250VAC or 19.5 to 250VDC power supply
• Requires a USB Bridge Key
• 35mm DIN rail mount casing (IP20 rated)
• Designed for harsh EMC environments
• CE approved & 5-year guarantee

Description

The Define Instruments Sentry trip amplifier accepts analog inputs from a range of industrial sensors, including: process, temperature, flow, frequency, and voltage. Inputs are electrically isolated form the output and the power supply, avoiding the potential for signal degradation from earth loops. It is designed to monitor input signals and switch its relays on and off to provide control and alarm functions.

With the optional analog output it can convert weaker signals into standard signals such as 4 to 20mA that can transmit longer distances and interface with PLCs and SCADA systems.

The Sentry features a universal power supply for both AC mains and 24VDC applications. This means no stocking high and low voltage versions or worrying whether you've taken the right one with you to the job. It can produce 22V excitation, enough to power common sensors two-wire and transmitters.

The Sentry is simple to setup and calibrate with the help of Define's ToolBox software, which explains all the Sentry's functions and features. It has an extensive library of pre-calibrated ranges and linearization tables for advanced scaling.

Spec Sheets

• Define Instruments Sentry Trip Amplifier Datasheet PDF (372 KB)
• Define Instruments Sentry Trip Amplifier Manual PDF (2.1 MB)
• Define Instruments ToolBox Software Download (v 1.7.8) ZIP (43.4 MB)
• All possible part numbers

Accessories

Required components.

These additional components are required for the operation of your product. We strongly advise you to purchase these components unless you already own them or own a suitable alternative.

PC connection to all USB-programmable Define Instruments, required for Zen, Javelin, Twin Link, Sentry, Merlin, Pathfinder & TM Series.

Please consider these optional accessories.

Self powered unit measures and converts a high AC current signal into a 0 to 10VDC isolated output.

Loop powered unit measures and converts a high AC current signal into a 4-20mA DC signal.

Interested in Other Part Numbers?

Other part numbers are available to order but are not currently in stock. Current availability for non-stock parts is "Limited to in-stock inventory". Click here to select options

Need Help? Call a Temperature engineer at 1-800-884-4967

We're open Mo-Th 8am to 5:30pm. Fr 8am to 5pm ET

Recently Viewed

Wireless Systems and Sensors

Power Supplies

Trip Amplifier and Process Limit Alarms

A trip amplifier is defined as a device that allows an Analog signal to be converted to a Relay output. The Relay output controls the variation of a physical unit in a system measured by temperature sensors or normalized signals and operates when the measured value goes outside pre-determined limits, energizing or de-energizing the relay controlling devices like valves and actuators. What Does Datexel offer? Datexel manufactures a large range of Trip Amplifiers and Process Limit Alarms that accept universal inputs and provide relays outputs. The DAT5024P is an economical choice of process limit alarm with the ability of being PC programmable for RTD's Thermocouples, Resistance, voltage or current inputs, and has 2 relays outputs (SPDT) with delay timers. The DAT5024AO is a process limit alarm with the ability to provide an analog output which is proportional to the analog input. The DAT5028 features a universal input trip amplifier and is also an isolated signal converter and has a local display with up to 4 relays and is DIP switch programmable. The inputs can be Thermocouples, RTD, mV, mA, Resistance, Potentiometers or Voltage. They can be supplied fully configured or set up by PC or DIP switches.

Input RTD, T/C's, Resistance, Current, Voltage. Output 2 Relay.

Input RTD, T/C's, Resistance, Current, Voltage. Output 2 Relay and Analog Output.

Input RTD, T/C's, Resistance, Current, Voltage, Pot. Output 2 Relay

Input RTD, T/C's, Resistance, Current, Voltage, Pot. Output 4 Relay

Input Thermocouples, RTD, Potentiometer, mA Resistance, mV. Output Relay

Input T/C's, RTD, Potentiometer, mA Resistance, mV. Output Relay, V & I

Input RTD, T/C's, Resistance, Current, Voltage. Output 1 Relay

Input RTD, T/C's, Resistance, Current, Voltage. Output 2 Relay

Input RTD, T/C's, Resistance, Current, Voltage.p Output 1 Relay

Input Current 4-120mA Voltage 0-50mV, 0-100mV 0-10V. Output 1 Relay.

Input Current 4-120mA Voltage 0-50mV, 0-100mV 0-10V. Output 2 Relay.

Input Current, and Voltage. Output 1 Relay

Input Current, Voltage. Output 2 Relay

Signal Conditioning Devices

• Become a distributor
• español
• français
• 中文

I want to send my request now

I want to continue browsing before sending my request

• Temperature
• I.S. interfaces
• Communication interfaces
• Multifunctional devices
• Special devices
• Accessories
• Product selector
• Factory automation
• Metal & Steel
• Oil & Gas
• Pharmaceutical
• Pulp & Paper
• Water and Wastewater
• Terms and conditions
• Takeback and Recycle Program EU
• Five-year warranty
• PR Knowledge Library
• Export Compliance
• Remote support
• Product documentation
• Publications
• 3000 series DIP-switch configurator
• CAD drawings
• PC SCHEMATIC Automation
• Company overview
• Sustainability and CSR
• Customer stories
• News and events
• Partner Portal & Training
• Sponsorships

• Special devices /
• Trip amplifer 2231
• Field-mounted HART temperature transmitter 7501
• 2-wire HART 7 temperature transmitter 6437A
• 2-wire HART 7 temperature transmitter 6437D
• 2-wire HART 7 temperature transmitter 5437A
• 2-wire HART 7 temperature transmitter 5437B
• 2-wire HART 7 temperature transmitter 5437D
• TC converter 3101
• Pt100 converter 3102
• TC converter - isolated 3111
• Pt100 converter - isolated 3112
• HART temperature converter 3113
• Temperature converter, loop-powered - isolated 3331
• Pt100 converter, loop-powered 3333
• HART temperature converter, loop-powered 3337
• 2-wire programmable transmitter 5131A
• 2-wire programmable transmitter 5331A
• 2-wire programmable transmitter 5331D
• 2-wire programmable RTD transmitter 5332A
• 2-wire programmable RTD transmitter 5332D
• 2-wire programmable transmitter 5333A
• 2-wire programmable transmitter 5333D
• 2-wire programmable transmitter 5334A
• 2-wire programmable transmitter 5334B
• 2-wire transmitter with HART protocol 5335A
• 2-wire transmitter with HART protocol 5335D
• 2-wire transmitter with HART protocol 5337A
• 2-wire transmitter with HART protocol 5337D
• Compact RTD temperature transmitter 5802
• 2-wire programmable transmitter 6331A
• 2-wire programmable transmitter 6331B
• 2-wire programmable transmitter 6333A
• 2-wire programmable transmitter 6333B
• 2-wire programmable transmitter 6334A
• 2-wire programmable transmitter 6334B
• 2-wire HART transmitter 6335A
• 2-wire HART transmitter 6335D
• 2-wire HART transmitter 6337A
• 2-wire HART transmitter 6337D
• Temperature / mA converter 9113A
• Temperature / mA converter 9113A-EMP
• Pt100 temperature sensor 7400
• Instrument housing 7401
• Wall-mounted Pt100 temperature sensor 7411C
• Ceramic socket for Pt100 sensor 7423
• Pt100 cable sensor 7430B
• Pt100 cable sensor 7430C
• Thermowell for Pt100 sensor 7440
• 2-wire room temperature transmitter 2914
• HART transparent repeater 9106B
• HART transparent driver 9107B
• Temperature / mA converter 9113B
• Temperature / mA converter 9113B-EMP
• Universal converter 9116B
• Universal converter 9116B-EMP
• Pulse isolator 9202B
• Solenoid / alarm driver 9203B
• Backplane 7908
• Backplane 7916
• Ex repeater / power supply 5104B
• Ex-isolated driver 5105B
• HART transparent repeater 5106B
• Programmable transmitter 5114B
• Ex signal calculator 5115B
• Programmable transmitter 5116B
• 2-wire programmable transmitter 5131B
• Pulse isolator 5202B
• Ex solenoid / alarm driver 5203B
• Programmable f/I - f/f converter 5223B
• Ex power supply 5420B
• Display / programming front 4510
• Communication enabler 4511
• Bluetooth communication enabler 4512
• ConfigMate 4590
• Universal uni-/bipolar signal transmitter 4104
• Universal transmitter 4114
• Universal transmitter 4116
• Universal trip amplifier 4131
• Universal AC/DC transmitter 4179
• Universal uni-/bipolar signal transmitter 4184
• Universal I/f converter 4222
• Universal f/I-f/f converter 4225
• Programmable transmitter 5114A
• Signal calculator 5115A
• Programmable transmitter 5116A
• Pulse isolator 5202A
• Universal converter 9116A
• Universal converter 9116A-EMP
• Pulse isolator / switch amplifier 3202
• Universal frequency converter 3225
• Isolated repeater 3103
• Isolated converter 3104
• Isolated converter 3105
• Isolated repeater / splitter 3108
• Isolated converter / splitter 3109
• Isolated universal converter 3114
• Bipolar isolated converter 3117
• Bipolar isolated converter/splitter 3118
• Loop powered isolator 3185
• 2-wire transmitter isolator 3186
• Repeater / power supply 5104A
• HART transparent repeater 5106A
• Loop-powered isolator 6185
• HART transparent repeater 9106A
• HART transparent driver 9107A
• Pulse isolator 9202A
• Solenoid / alarm driver 9203A
• Loop-powered LCD indicator 5531A
• Loop-powered LCD indicator 5531B
• Programmable LED indicator 5714
• Programmable LED indicator 5715
• Programmable frequency indicator 5725
• Programmable f/I - f/f converter 5223A
• Programmable f/I - f/f converter 5225A
• Valve controller 2224
• mV transmitter 2261
• Power connector unit 3405
• 2-wire level transmitter 5343A
• 2-wire level transmitter 5343B
• Power control unit 9410
• Power supply 9421
• USB HART modem 277
• Bluetooth HART modem 278
• Electromechanical counter 3400T
• Loop Link communications interface 5909
• CJC connector 5910
• CJC connector 5910Ex
• CJC connector 5913
• CJC connector 5913Ex
• Spring clip 7002
• Shunt resistor 0.1 Ω 7005
• Shunt resistor 1 Ω 7006
• 2-digit digital potentiometer 7007
• 3-digit digital potentiometer 7008
• 10-turn potentiometer, 200 Ω 7009
• 10-turn potentiometer, 20 kΩ 7010
• Dial for 10-turn potentiometer 7011
• 1-turn potentiometer, 1 kΩ 7012
• Shunt resistor 0.5 Ω 7014
• 1-turn potentiometer, 10 kΩ 7015
• 1-turn potentiometer, 100 kΩ 7016
• Knob for 1-turn potentiometer 7020
• Knob for 10-turn potentiometer 7020A
• 11-pole relay socket 7023
• Code ring and code pin 7024
• 10-turn potentiometer, 2 kΩ 7028
• Shunt resistor 0.2 Ω 7029
• Label sheet with engineering units 7031
• Splash-proof cover 8335
• Inductive proximity sensor 8341
• Inductive proximity sensor 8342
• Inductive proximity sensor 8343
• Inductive proximity sensor 8344
• DIN rail fitting 8421
• PReset USB stick 8440
• Field enclosure 8501
• Interface cable 8509
• 8 unit 4511 Modbus cable 8510
• 4511 Y-splitter Modbus cable 8511
• RJ45 Modbus termination 8513
• 3 X RJ45 female Y-splitter 8514
• RJ45 female to female cable adapter 8515
• RJ45 female to female shielded cable adapter 8516
• 3 x RJ45 female shielded Y-splitter 8517
• 7501 Blind plug 8550
• 7501 Blind plug 8550-F
• 7501 Blind plug 8550-S
• 7501 Blind plug 8550-SF
• 7501 Blind plug 8551
• 7501 Blind plug 8551-S
• 7501 Pipe-mounting bracket 8552
• 7501 Display spare part with LOI 8555
• 7501 Display spare part without LOI 8556
• 7501 Bracket spare part for display and transmitter 8557
• 7501 Bracket spare part for transmitter only 8558
• Power rail 15 mm profile 9400_1
• Power rail 7.5 mm profile 9400_2
• Extra end covers for power rail 9402
• Module stop 9404
• Short circuit bridge ST9106-01

Trip amplifier

• AC/DC trip amplifier
• 2 adjustable alarm limits
• Galvanically isolated 3.75 kVAC
• Front-programmable
• 3-digit LED display
• 24 VDC or universal supply

Overview + -

Technical details + -, accessories + -, order and delivery + -, why choose pr + -, advanced features.

• The front-operated push buttons are used for programming the different standard functions.
• A password can prevent access for changing parameters.

Application

• Alarm detector in connection with measurement of AC/DC current or voltage signals.
• The unit is used where accurate setpoint setting and different alarm functions are required.
• The unit can be used as a single or dual trip amplifier.
• Used in applications where programmable parameters such as hysteresis, setpoint, reset, active relay for increasing or decreasing signal, delay and input signal need to be set.

Technical characteristics

• 3-digit display showing the input signal in %.
• Two LED indicating relay status.
• 3 pushbuttons for programming.
• Standard DC current input signals in the range 0...20 mA.
• DC voltage signals in the range 0...250 VDC.
• AC current signals up to 1 A.
• True RMS measurement of AC voltage signals in the range 0...250 VAC.
• Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.

Data sheet & Manuals

• Latest version
• 2231V106_UK.pdf
• 2231V105_UK.pdf
• 2231V104_UK.pdf
• Previous versions

Manuals in Russian

• 2231V106_RU.pdf
• 2231V105_RU.pdf
• 2231V104_RU.pdf

Supplementary documentation

Eu declaration of conformity.

• 2231DoC_EU_103_UK.pdf
• 2231DoC_EU_102_UK.pdf
• 2231DoC_EU_101_UK.pdf
• 2231DoC_EU_100_UK.pdf

PR default configurations

• PR_default_configurations.pdf

Safety note

• SN2200-1_107_2436.pdf
• SN2200-1_106_2340.pdf
• SN2200-1_105_2232.pdf
• SN2200-1_104_1937.pdf
• SN2200-1_103_1745.pdf
• SN2200-1_102_1613.pdf
• SN2200-1_100_1106.pdf

Approvals & Certificates

Dnv marine certificate.

• DNV_2231_41xx_51xx_53xx.pdf

EAC declaration

• EAC-Declaration.pdf

Metrology Pattern Approval (MPA), Russia

• MPA_Russia.pdf

Environmental Conditions

Mechanical specifications, common specifications, input specifications, output specifications, observed authority requirements.

Need support to select the right product for your application?

Our sales engineers are ready to help specify the right device to meet your needs.

Reach out by phone to get in touch with us straight away – or use the contact form or quick quote function to send your RFQ directly from the website. You’ll get a response within 24 hours on normal business days.

You can expect to get a confirmed delivery date via email within 2 days after we have received your order.

As soon as your package leaves our warehouse, you’ll receive tracking details via email. And if you have any questions along the way we’re just a phone call or email away.

Company information

Your information.

A mistake has occurred. Please call us instead

If you need support, you are always welcome to contact us

Register here to receive our newsletter

Universal input with 2 relay outputs

• Pt100, Thermocouple, mA, mV input
• Dual Relay Outputs 250V AC @ 1A
• Relay Contacts isolated from each other
• Galvanic Isolation
• View live data on an Android phone or tablet
• High stability
• PC Programmable

The SEM1630 is a universal trip amplifier and provides a dual relay switch function for RTD or Thermocouple sensors as well as mA and mV signals. Its relays can be programmed to be either high or low alarms and required a separate 24Vdc power supply.

Designed for ease of use, the universal trip amplifier uses a USB port for quick and easy configuration. Just connect a standard USB cable between the product and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1630 range does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

• Category: Signal Conditioners .

• Signal Conditioners

Online calculators

Access our online calculators 24/7!

Get help on the move via our apps!

Download our free apps on both Apple and Android devices.

• Temperature Transmitters Head Mounted
• Temperature Transmitters & Other Packages
• Temperature Transmitters Head Mount Analogue
• Temperature Probe Assemblies
• Thermowells
• Connection Heads & Accessories For Probes
• Rail Mounted Temperature Transmitter
• Loop Powered Isolators, Converters & Splitters
• ATEX barriers and repeaters
• Loop Powered Indicators & Process Gauges
• Digital Panel Meters
• Temperature Gauges
• Pressure Transmitters & Pressure Gauges
• Humidity Transmitters & Indicators
• Wireless Temperature Transmitter
• Sub Sea Temperature Measurement
• Accessories
• Product Feature Tool
• Temperature Probe Selection Tool
• Calibration Service
• About Status
• Our Distributors
• Company Information
• Calculators
• Certification
• Download Product Guide
• Legacy Products
• Technical Reference
• How to find us
• Follow us on LinkedIn

How can we help?

Tell us what you are looking to achieve & we will aim to provide the best solution and price. Rather speak to someone?

Call 01684 296818.

HOW DID YOU HEAR ABOUT US? —Please choose an option— Search Engine Social media Referral Advertisement

We’ll do our best to respond within 4 working hours.

If you need a quicker response, please call us on 01684 296818.

• Product Search
• Signal Converters Signal converters convert the format of the input signals into the desired output format. In addition to the pure conversion of signals, signal converters also offer the possibility of filtering or linearizing signals. A signal transmitter is a device that transmits data from one place to another. In the case of mechanical equipment, a signal transmitter sends a process signal like temperature, pressure or humidity from a measurement apparatus to an electronic device like a panel meter, controller or computer. In the machinery or test environment, signal transmission is of critical importance. This is because of the nature of testing itself.
• Signal Isolators Signal isolators provide electrical (galvanic) isolation between the input and output circuits. They couple the signal to the output through a transformer or optical isolator. Signal isolators also break the direct electrical galvanic path between two or more loop points. They protect against dangerous measured-variable voltages and increase protection from surges and spikes.
• Trip Amplifiers A trip amplifier is a device that allows an Analogue signal to be converted to a Digital output. The digital output controls the variation of a physical unit in a system measured by temperature sensors or normalized signals and operates when the measured value goes outside predetermined limits, energizing or de-energizing the relay controlling devices like valves and actuators.
• Transducers A transducer is a device that converts energy from one form to another. Usually a transducer converts a signal in one form of energy to a signal in another.
• Panel Meters/Displays Panel meters are instruments that display an input signal in an analogue or digital form.
• Arithmetic/Special Units An arithmetic unit is a hardware subsystem that performs arithmetic operations on binary inputs.
• All Categories
• Datasheet Centre (Translated Datasheets available on request)
• Terms and conditions
• Privacy Policy
• Request A Quote
• Trip Amplifiers

AEC232 - 4-20mA Process Input Signal Isolator Output with Trip

AEC132 - 4-20mA Input Dual Output Trip Amplifier

ADT151 - AC Current Input Single Output Trip Amplifier

ADT152 - AC Voltage Input Dual Output Trip Amplifier

AHT Series - Individual Plug-In Modules

ADT131KTX - Contact Repeater Module with Time Delay Trip Amplifier

ADT131DITXP - Cycle Timer Input Single Output Trip Amplifier with Hours Run Display

Adt133 - dual input channel dual output trip amplifier, adt132 - process input dual output trip amplifier.

ADT138X-5 - Five Channel Process Input Single Output Trip Amplifier

ADT181 - Frequency Input Single Ouput Trip Amplifier

Adt131 - process input trip amplifier.

ADT131KLX-4 - Process Input Trip Amplifier with Additional Latching Relays & Remote Reset

ADT181KXT - Pulse Count Input Trip Amplifier

Adt135 - pump/level control input trip amplifier.

ADT135DI - Pump/Level Control Input Trip Amplifier with Display

• AC Series (4)
• AD Series (129)
• AEC Series (19)
• AEP Series (2)
• AGS Series (11)
• AH Series (7)
• AMT Series (10)
• APM Series (17)
• Arithmetic/Special Units (28)
• AS Series (12)
• ASC Series (12)
• ATA Series (14)
• Panel Meters/Displays (19)
• Power Supply Unit (2)
• Signal Converters (74)
• Signal Isolators (80)
• Transducers (25)
• Trip Amplifiers (85)
• Trip Transmitter (4)
• Uncategorized (5)

JavaScript seems to be disabled in your browser. You must have JavaScript enabled in your browser to utilize the functionality of this website.

Contact our technical sales team now to discuss your requirements

You have no items in your shopping cart.

Click basket to edit.

• SYSTEM EXAMPLES

4116 Universal Transmitter/Trip Amplifier

Data loggers.

• Tinytag Transit 2 Temperature Data Logger
• Tinytag Talk 2 Data Logger for Temperature, Voltage, Current.
• Tinytag Ultra 2 Data Logger - Temperature. Humidity
• Tinytag Plus 2 Temperature & Humidity Data Logger
• Tinytag View 2 Temperature & Humidity Data Logger with LCD Display
• Tinytag Plus 2 Instrumentation Data Loggers for mA & Voltage
• Tinytag View 2 Instrumentation Data Loggers for mA & Voltage with LCD
• Tinytag Plus 2 Instrumentation Data Loggers for Digital Inputs
• Tinytag Plus 2 Current Clamp Logger
• Tinytag View 2 Current Clamp Data Logger with LCD Display
• Tinytag Energy Logger
• Tinytag Aquatic Underwater Temperature Loggers
• Tinytag Splash 2 Temperature Data Logger
• Tinytag CO2 Logger
• Tinytag Plus Radio Data Logging System
• Tinytag Software, Starter Packs and Interface Cables
• Tinytag Thermistor Temperature Probes
• Tinytag PT100 & PT1000 Temperature Probes
• Calibration Certificates for Tinytag Data Loggers
• EL-USB Loggers for Temperature Monitoring
• EL-USB-2 Temp & RH Data Loggers
• EL-USB Data Loggers with LCD Displays
• EL-USB Vaccine Temperature Data Loggers
• EL-DataPad Handheld Programmer for EL-USB Data Loggers
• EL-SIE Temp, RH & Pressure Data Loggers with LCD Displays
• EL-BT-2 Temperature and Humidity Bluetooth Data Logger with Display
• EL-WiFi-T Wireless Temperature Logger
• EL-WiFi-TP Thermistor Probe Data Logger
• EL-WiFi Vaccine Monitoring Kits
• EL-WiFi-TC Thermocouple Probe Data Logger
• EL-WiFi-TH Wireless Temp & RH Data Logger
• EL-USB-3 Voltage Data Logger
• EL-USB-4 Current (4-20mA) Data Logger
• EL-USB-5 Counter, Event and Digital State Data Logger
• EL-USB-CO Carbon Monoxide Data Loggers
• EasyLog Cold Chain Data Loggers
• Merlin Data Logger SDL1200
• MSR145 Standard Data Logger
• MSR Reusable Climate Data Loggers
• MSR145WD Bluetooth Data Logger
• MSR145W2D WiFi Data Logger
• MSR147WD Bluetooth Data Logger with Plug-in Sensors
• MSR147W2D WiFi Data Logger with Plug-in Sensors
• MSR160 Data Logger with 4 Analogue Inputs
• MSR165 Data Logger for Shock & Vibration
• MSR175 Shock Transportation Data Logger
• MSR175+ GPS Transportation Data Logger
• MSR255 Data logger with LCD screen
• MSR385WD Data Logger with Wireless Sensors
• GSKIN Data Logger Kits
• GSKIN DLOG Heat Flux Data Loggers
• LEO 5 Digital Manometer with Data Logger
• LEO Record Pressure Data Logger
• LEO Record CAPO Pressure Data Logger
• HiTemp140 Extreme Temperature Data Loggers
• HiTemp140-PT Temperature Data Logger with Flexible Probe
• ThermoVault140 Thermal Barrier System
• HygroLog xL-1D Data Logger
• HygroLog HL20D Data Logger
• Multi-Parameter Display
• HC2A-USB Temperature & Humidity Probe with USB interface
• HygroSoft Software
• Fully Configurable Cold Chain Temperature Data Logger
• Datataker DT80 Universal Input Data Logger
• Datataker DT82E Environmental Logger
• Datataker DT82i Industrial Data Logger
• Datataker DT85 Stand Alone Data Logger
• GL240 Data Logger
• GL840 Data Logger
• GL100 Petit Logger
• GL980 Data Logger
• GL2000 Data Logger
• GL7000 Modular Data Acquisition Unit
• FieldLogger
• LogBox Connect Data Logger
• Novus LogBox Dual Channel Data Logger
• SRD-99 Data Logger Display Unit
• SRD-N16 Wall Mounted Data Logger
• CMC-99 Multichannel Display/Logger
• CMC-141 Multichannel Display/Logger
• CMC-N16 Multichannel Display/Logger in IP65 Enclosure
• GRD-4GM Series Data Logger with Mobile & Satellite Communications
• cLAN Ethernet TCP/IP Data Logger
• RME1 Ethernet Web Enabled Analogue Acquisition Unit
• RME2 Ethernet Web Enabled Analogue Acquisition Unit
• SSE-232 Ethernet Web Enabled Digital Acquisition Unit
• M2M Data Web Interface for Remote Data Acquisition
• SQ Series Data Loggers with 8-16 Analogue Inputs
• Squirrel OQ610 Temperature Data Logger
• OQ610-S Through Process Data Logging Systems
• OMK610 Squirrel Oven Logging System
• Portable Field Logging Systems
• Wireless Umbilical Data Logger
• Gen II Wireless Data Logger for Temperature, Humidity and Process Signals
• Squirrel 450/850 Series Data Logger
• 1000 Series Squirrel

Displacement & Position Sensors

• Industrial Series Linear Velocity Displacement Transducers
• Miniature Series Linear Velocity Displacement Transducers
• P100 Cylinder Linear Position Sensor
• P500 Rotary Position Sensor
• P501 Miniature Rotary Sensor
• RIPS P502 small angle rotary sensor (2.5 to 10 deg travel)
• VLS Optical Speed Sensor with Pulse Output
• VLS/DA Optical Speed Sensor with Analogue Output
• MiniVLS 313 Speed Sensor with USB Connection
• MiniVLS 211/ia Intrinsically Safe Optical Speed Sensor
• DMI410 Digital Display Single Axis Inclinometer
• DMI420 Digital Display Dual Axis Inclinometer

Display & Control Products Signal Amplifiers & PSUs

• 3225 Slim Series Universal Frequency Converter
• 4222 Universal I/f Converter
• 4225 Universal f/I & f/f Converter
• 5223 Programmable f/I - f/f Converter
• 5225 Programmable f/I - f/f Converter
• 9202A Pulse Isolator
• 9202B ATEX Pulse Isolator
• 9203A Solenoid & Alarm Driver
• 9203B ATEX Solenoid & Alarm Driver
• 4114 Universal Transmitter
• 4131 Universal Trip Amplifier
• 4104 Universal Uni-/Bi-Polar Signal Transmitter
• 4179 Universal AC/DC Transmitter
• 4184 Universal Uni/Bi-Polar Signal Transmitter
• 3100 Slim Series of 6mm Isolators & Converters
• 2224 Valve Controller
• 2231 Trip Amplifier
• 2261 mV - Load Cell Transmitter
• 5104 Repeater/Power Supply
• 5105B EX-Isolated Driver
• 5106 HART Transparent Repeater
• 9106A HART Transparent Repeater
• 9106B ATEX Approved HART Transparent Repeater
• 9107A HART Transparent Driver
• 9107B HART Transparent Driver
• 5114 Programmable Transmitter
• 5115 Signal Calculator
• 5116 Universal Programmable Transmitter
• SY38 Load Cell Amplifier
• 5202B 2-Channel Pulse Isolator
• 5203B EX Solenoid/Alarm Driver
• 6185 Loop Powered Isolator
• 9116 Universal Converter
• 3100 Slim Series of 6mm Temperature Transmitters
• PR 3300 Series Loop-Powered Temperature Converters
• 3186 Slim Series of 6mm Transmitter/Current Isolators
• 5714 Universal Indicator
• 5715 Programmable LED Indicator
• 5725 Programmable LED Converter with indicator
• 5531 Loop-Powered LCD Display
• LCD Loop Powered Display
• Intuitive 4 Series - Digital Panel Meters
• AT01 CH7 Battery Powered LCD Counter Display
• Simex SRP-N118 LED Display
• Simex SRT-N118 LED Display
• SWE-N55L Loop Powered LED
• Simex SRP-94(6) LED Display
• Simex SWE-73-L Loop Powered LED Display
• Simex SRT-94 LED Display
• 1700 series displays up to 280mm
• Fusion Series Large Digit Displays
• Large Digit Universal Indicator N1500-G
• MT8051iE HMI Touchscreen Display
• SWT-99X Multi-channel Temperature Indicator
• SWP-99X Multi-channel Process Indicator
• SWS-W510 Large Digit Panel Indicator
• N20K48 Process Controller
• N1040i Universal Process Indicator
• N480D Series PID Temperature Controller
• Universal Indicator N1500
• N321 Electronic Thermostat
• N321R Electronic Thermostat with Defrost Cycle
• N322 Electronic Thermostat
• N322T Electronic Thermostat
• Temperature Controller N960
• Universal Controller N2000
• Universal Controller N2000-s
• Universal Controller N3000

Flow Meters

• 190F Fixed Ultrasonic Flowmeter
• DFM2 Fixed Ultrasonic Doppler Flow Meter
• OMNI-ECO-200M DIN Rail Mounted Ultrasonic Flow Meter
• OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter
• Omni TDI-200H Handheld Ultrasonic Flow Meter
• Precision 190P Dual Mode Portable Clamp On Ultrasonic Flowmeter
• PDFM3-L Portable Doppler Flow Meter
• OMNI-TM-8812 Ultrasonic Thickness Gauge
• Multical 403 Ultrasonic Energy Meter
• 190PDE Portable Ultrasonic Clamp on Heat Meter
• DTI-EMF Series Electromagnetic Flow Meter
• NT Stainless Steel Turbine Flow Meters for clean liquids
• LFT Stainless Steel Turbine Meter Range
• Vision Series Turbine Flow Meters
• Model G2 Turbine Flow Meter for clean liquids
• CDI 5100 Inline Compressed Air Flow Meter
• CDI 5200 Compressed Air Flow Meter
• CDI 5250 Hot Tap Compressed Air Flow Meter
• CDI 5400 Compressed Air Flow Meter
• CDI 5450 Hot Tap Compressed Air Flow Meter
• Stainless Steel Gas Flow Turbine Meter
• AV-D Single-Point Multi-Range Air Velocity Transmitter
• AVT Air Velocity and Temperature Transmitter
• Multi-Point Air Velocity Probes & PA267 Differential Pressure Sensor.
• DPT Flow Meter for Fan Control
• MiniAir6 Vane Anemometers for Air Flow Monitoring
• MiniAir60 Vane Anemometers for Air Flow Monitoring
• MiniAir64 Vane Anemometers for Air & Gas Flows
• MiniAir Vane Anemometers with Ex Certification
• MC 4.0 Multiprobe Anemometer with Logger and Display
• MiniAir20 Eex Portable Vane Anemometer with Display for Hazardous Areas
• MC 4.0 ThermoAir Hot Wire Anemometer
• ThermoAir 6 & 64 Hot Wire Anemometer with 0-1V or 4-20mA Output
• MC 4.0 ManoAir Pressure Gauge
• Lab 4.0 Manometer
• Tunnel Air Flow Measurement TMS3000
• DFM Variable Area Flow Meters.
• SC-250 Metal Tube Variable Area Flow Meter
• DP65 Target Flow Meter
• BGN Variable Area flow meters for gases and liquids
• Multi-Jet Water Meter (Cold) Dry Dial
• Multi-Jet Water Meter (Hot) Dry Dial
• Omega Water Meters for cold water.
• Woltmann Helix Hot Water Meter
• Irrigation Water Flow Meter
• MC 4.0 Open Channel Water Flow Meter with Logger & Display
• Portable Flow Meter for Open Channel Flow Measurement
• MiniWater6 Water Velocity Probes with Voltage Output
• MiniWater64 Water Velocity Probes with Current Output
• MiniWater60 Water Velocity Probes with Frequency Output
• FS6200 Micro Flow Switches For Gases
• FS6700 Micro Flow Switches For Liquids
• FS5100 & FS5700 Flow Switches for Liquids and Gases
• UR3K Adjustable Paddle Type Flow Switch
• VFM60 Vortex Flow Meter
• F012 Flow Rate & Totaliser Display
• F110 Flow Rate & Totaliser Display
• F112 Flow Rate & Totaliser Display with Linearisation
• F116 Flow Computer
• F130 Batch Controller
• SCS Calibration for Vane and Thermoelectric Anemometers
• Ultrasonic Anemometer Calibrations

Gas Detection Equipment

• MX6 iBrid Multi Gas Portable Gas Detector / PID
• PS500 Multi Gas Detector
• Personal Surveyor (PS200 Series) Portable Gas Detector
• Ventis MX4 Portable Multigas Detector
• Tango TX1 Personal Single Gas Monitor
• Tango TX2 Personal Two Gas Detector
• GasBadge Pro Dockable Single Gas Monitor
• BM25 Transportable Multi-Gas Detector
• GT Series Multi Function Portable Leak Detector
• GT-FIRE Series Multi Function Portable Leak Detector
• OLCT100 Fixed Gas Detector.
• OLCT60 Fixed Gas Detector with Display
• OLCT80 Standalone Fixed Gas Detector with Flameproof Sensors
• OLCT80 Standalone Fixed Gas Detector with Intrinsically Safe Sensors
• OLC(T)10 EXPLO Gas Detectors for Explosive Gases
• OLCT10 Gas Detectors for Refrigerant and Toxic Gases
• OLCT10N Fixed Digital Gas Detectors
• CTX 300 Gas Detector for Non-Hazardous Areas
• SafEye Quasar 900 Open Path Combustible Hydrocarbon Gas Detector
• GS-CO2 Space Mounted CO2 Transmitters
• CMT Carbon Monoxide Transmitter
• SV 4B Alarm Monitoring Unit
• MX16 Easy Duo Gas Detectors with Control Panel
• MX16 Gas Detection Control Panel
• MX32 Gas Detection Controller
• MX43 Alarm/Display Unit
• MX52 16 Channel Alarm/Display Unit
• Spectrex 20/20MPI Polycarbonate Series Indoor Flame Detectors
• Spectrex 20/20MI Series Mini Triple IR (IR3) Flame Detectors
• Spectrex 20/20ML Series Mini UV/IR Flame Detectors
• SharpEye Next Generation 40/40C Flame Detector.
• SharpEye Premium 40/40D Flame Detector.
• Sharpeye Flame Simulator

Gyros & Accelerometers IMU's & Tilt Sensors

• Three Axis Accelerometers with an Analogue Output.
• Three Axis Accelerometers with RS232/RS485 Modbus RTU Output.
• LPMS 9-Axis IMU AHRS Motion Sensor with Wired Connections
• LPMS-IG1 9-Axis High Precision IMU with Optional GPS Connectivity.
• LPMS-B2 9-Axis IMU AHRS Motion Sensor with Bluetooth 2.1 & 4.1 Connectivity
• LPMS-CURS3 9-Axis IMU/AHRS Motion Sensor. OEM Version
• OEM Compass
• GPS-MB Industrial GPS with NMEA and Modbus Communications
• ComNav G1 GNSS Satellite Compass
• ComNav G2 and G2B GNSS Satellite Compass
• ComNav G2 GNSS Satellite Compass with G2 Navigator Display
• DMI810 USB Touchscreen Single Axis Inclinometer
• DMI820 USB Touchscreen Dual Axis Inclinometer
• DMI810 Serial Touchscreen Single Axis Inclinometer
• DMI820 Serial Touchscreen Dual Axis Inclinometer
• LCA Series Inclinometer
• HAI Dual Axis Inclinometers
• HCA520T High Accuracy Inclinometer with Voltage Outputs
• HCA528T High Accuracy Inclinometer with Current Outputs

Hire Equipment Data Loggers, Flow & Energy Meters, Weather Stations

• GL220 Data Logger Hire
• DT82i Data Logger Hire
• DT82E Data Logger Hire
• DT80 Data Logger Hire
• DT85 Data Logger Hire
• SQ2040-2F16 Data Logger Hire
• Tinytag Energy Logger Hire Unit
• 190P Portable Clamp-On Ultrasonic Flow Meter Hire
• Portable Handheld Flow Meter Hire for Open Channel Flow Measurement
• Portable Handheld Flow Meter Hire for Air Flow Measurement
• RWS-07 Portable Weather Station Hire
• Rain Gauge with Data Logger Hire

Level & Distance Sensors

• Senix Toughsonic TSPC Ultrasonic Level Sensors
• Senix Toughsonic Remote Ultrasonic Level Sensors
• Senix Toughsonic CHEM Ultrasonic Level Sensors
• PTM/N Programmable Submersible Depth Sensor
• Series 26Y Piezoresistive Water Level Transmitter.
• Series 36XW Digitally Compensated Submersible Level Transmitter
• Series 46X Capacitive Pressure Sensor for Water Level Measurements
• Series 46XEi Intrinsically Safe Capacitive Pressure Sensor
• DCX-22 SG/VG Water Level Data Logger
• ATM/NC Level Transmitters for Corrosive Media
• Horizontal Float Switch FLCS-01
• Vertical Float Switch
• Liquid Level Float Switch
• Fuel Level Float Switch
• DUT-E Fuel Level Sensors
• DUT-E 2 BIO Fuel Level Sensors
• Water Detection Alarm System WD-AMX
• Water Leak Detection Cable WD-CS
• Water Leak Detection Point Sensor WD-PS
• TL400 Non-Intrusive Laser Level Sensor

Load & Torque Sensors

• DBB S Beam - Bi-directional Load Cell
• DBBSM S Beam - Bi-directional Load Cell
• DBBSMM Series Miniature S Beam - Bi-directional Load Cell
• DBCR Low Range Miniature S Beam - Bi-directional Load Cell
• DDE Miniature Low Profile - Bi-directional Load Cell
• DDEN Miniature Low Profile Submersible - Tension & Compression Load Cell
• DBCL In-Line - Bi-directional Load Cell
• DSCRC Series - Pancake/Low Profile - Bi-Directional Load Cell
• DSCC Series - Pancake/Low Profile - Bi-directional Load Cell
• CCDDT Column Type Compression Dome Top Load Cell
• CBES Low Profile - Compression Load Cell
• CDF Miniature Low Profile - Compression Load Cell
• CDFM3 Miniature Low Profile - Compression Load Cell
• CDFT Micro Button Load Cell
• CCG Annular Force Washer - Compression Load Cell
• CCGBP Series - Brake Pedal Load Cell
• OBUG Single Point Platform Load Cell
• OBUC Single Point - Compression Load Cell
• OBBS Bending Beam - Compression Load Cell
• OSBKT Single-Ended Shear Beam Load Cell
• OSBST Single-Ended Shear Beam Load Cell
• DBEP Load Pin - Compression Load Cell
• ET24 Telemetry Lift Link Tension Load Cell System
• ETW Tensile Lift Link - Wired Type
• WP Platform - Compression Load Cell
• DBBSS / TSF Torque & Tension Load Cell
• Load Cell Indicator N1500-LC
• ICA Series Miniature Analogue Strain Gauge Voltage & Current Signal Amplifiers.
• DSCUSB Load Cell Digitiser Module
• Programmable Load Cell Amplifier
• TR150 Hand-Held Portable Strain Gauge Indicator.
• TRX Portable Strain Gauge Indicator with TEDS Functionality.
• SGA SERIES - Analogue Strain Gauge Signal Conditioning Amplifier
• SGR Series Rotary Transducer For Torque Measurements
• SGR Series Rotary Transducer For Torque, Speed & Power Measurements
• SGR Series Rotary Transducer For Torque Measurements - External Electronics
• SGR Series Rotary Transducer For Torque, Speed & Power Measurements - External Electronics
• ORT Series Optical Rotary Torque Transducers

Pressure Sensors

• Keller Piezoresistive Pressure Transmitters Series 21Y
• PA600 Series Standard Industrial Pressure Transducers and Transmitters
• PA600 Barometric Pressure Transmitter
• Hammer Union Pressure Sensor
• Keller Series 33X & 35X Highly Precise Pressure Transmitters
• P600FA Field Adjustable Pressure Transmitters
• P642FAX Field Adjustable Pressure Transmitters
• PTM Programmable Pressure Transmitter with 4-20mA, RS485 Output
• Keller Series 23SX High Precision Piezoresistive Pressure Transmitters
• Keller Series 23SY Temperature Compensated Pressure Transmitters
• Keller RFID Pressure / Transponder Data Logger Series 21 D(C) RFID
• Keller EXd Pressure Transmitters for Hazardous Applications, Series 23 ED / 25
• Static Pressure Sensor Heat Sink
• Keller Series 6LHP Piezoresistive OEM High Pressure Transducer
• Keller Series 7L Miniature OEM Pressure Transducer
• Keller Series 7LHP Piezoresistive OEM High Pressure Transducer
• Keller Series 7S/9S miniature pressure transducer
• PTi18 Ceramic Pressure Capsule
• Series 10L Piezoresistive OEM Pressure Transducers
• Series 10LHP Piezoresistive OEM Pressure Transducer
• Keller PD10L OEM Differential Pressure Transducer
• Keller PAA 15 Flush Diaphragm Pressure Transducer
• PA600-LR Low Range Industrial Pressure Transmitters
• Keller PD39X Series Differential Pressure Transmitter
• Keller PD39XEi Series Intrinsically Safe Differential Pressure Transmitter
• Keller PD33X Differential Pressure Transmitter
• PL-692 Differential Pressure Transmitter
• Keller Differential Pressure Transmitter - PD23 Series
• GC5 Wet/Wet Differential Pressure Transmitter with Display
• PR41X Low Range Pressure Transmitter.
• PR41XEi Intrinsically Safe Low Range Pressure Transmitter.
• PD41X Low Range Differential Pressure Transmitter.
• PL-525 Relative Pressure Transmitter for Low Pressure Liquids or Gases.
• DPT-R8 Differential Pressure Transmitter
• PS Differential Pressure Switch
• PA-DPS Differential Air Pressure Switch
• PA-699 Multi-range Differential Air Pressure Sensor
• 9200 Handheld Differential Pressure Meter
• Keller LEO 1 Digital Manometer
• Keller LEO 2 Digital Manometer
• Keller LEO 3 Digital Manometer
• Keller LEX 1 Digital Manometer
• Keller LEX1Ei Digital Manometer
• LEX1-CAPO Digital Manometer
• Keller High Temperature Pressure Transmitters Series 35X HTC
• Keller 35 X HT(T) Pressure Transmitter for Applications in Bio-Reactors or Autoclaves
• Keller Series 25Y Flush Diaphragm Temperature Compensated Pressure Transmitter
• Series M5 HB Ultra-Fast and Precise Pressure Transmitters
• DMP331 Flush Diaphragm Pressure Transmitter
• DMK331P Flush Diaphragm Pressure Transmitter
• ATM/N/T Submersible Depth and Temperature Sensor
• ATM/N and ATM/N/EX Submersible Depth Sensor
• PTM/N/RS485 Programmable Submersible Depth Sensor
• PA33X and PA33XX Subsea Pressure Transmitter
• PD33-39X Subsea Pressure Transmitter
• Pressure Calibration Certificates
• UKAS Calibration of LEO Gauges

Radio & GSM Telemetry

• WSR 8/16 Channel GEN II Telemetry System
• RC250 Modbus GEN II Telemetry System
• RX250-AL GEN II Receiver Loggers
• Handywave HPS-120 Radio Modem
• Handywave HPS-200 Radio Modem
• wRemote Wireless Data Acquisition System
• WSerial 2.4GHz Wireless Radio
• WTunnel 2.4GHz Wireless ZigBee Radio System
• Intrinsically Safe Wireless Access Point/Bridge
• WMO-400S Series High Performance Modem
• WMO-800S Series High Speed Modem
• WLN-2000 Series Industrial Wireless Ethernet Range
• DigiRail I/O Modules
• DE211 Serial to Ethernet Converters
• NPort 5100 Series - Serial to Ethernet Converters
• NetPort Serial-to-Ethernet Cable Adaptor
• USB-i485 RS485 to USB Converter
• Modbus TCP to DF1 Converter

Serial Ethernet & ModBus Communications

• SSE232-IA3 Industrial Serial Server
• SSE232-LE Serial to Ethernet Converter
• SSE232-ST Standard
• Serial Com Port Redirector
• DigiRail Connect - Ethernet I/O Module
• RMS2 Acquisition Module with Serial Communications
• RMS1-TD Quad temperature meter with Modbus interface
• RMS1-GR Digital and Analog I/O in Modbus Serial
• EGW1-2ETH-IA3-MB - Serial Modbus To Modbus TCP Converter with Dual Ethernet Switch
• EGW1-IA3-MB - Modbus ASCII or RTU To Modbus TCP Protocol Converter
• EGW1-MB-WIFI - Modbus ASCII / RTU to Modbus TCP Converter with Ethernet or WiFi Connection
• SGW1-IA2-MMP Modbus Multiplexer
• SGW1-IA3-MMP Modbus Multiplexer
• EGW1-MB-HT HART to Modbus TCP, RTU and ASCII Converter
• SGW1-IA3-MB-NM NMEA to Modbus Converter
• MiniPlex3-USB MODBUS to NMEA Converter and Multiplexer
• SGW1-IA3-MB-HL Modbus ASCII / RTU to Hostlink Converter
• MCV2 - RS232 to RS485/422 Converter
• MCV1 - FO Ethernet Fiber optics
• MCV1 - FO - SER Industrial Fiber Optic to Serial Converter

Solar & Wind Power Batteries & Enclosures

• Ameresco Photovoltaic Solar Panels
• SunWare Solar Panels
• SpectraLite SemiFlex Solar Panels
• Mounting Kits for Solar Panels.
• Rutland 504 Wind Generator
• LE-v50 Vertical Axis Wind Generator
• LE-v150 Vertical Axis Wind Generator
• Rutland 914i WindCharger
• Rutland 1200 Windcharger
• Rutland FM910-4 Furlmatic Windcharger
• Rutland Furlmatic 1803 Windcharger
• Land Based Mounting Kits
• On-Board Mounting Kits
• HRS Charge Controller
• HRSi Charge Regulator
• HRDi Charge Controller
• Solsum Regulators
• DL300 Wind Turbine Controller (12/24V)
• Lithium Polymer Rechargeable Batteries
• LiFePO4 Rechargeable Battery Peli Case Kit
• Sealed Lead Acid Batteries
• Absorbed Glass Matt (AGM) Batteries
• Sealed Gel Batteries
• Battery Chargers - for 12V and 24V Lead Acid Batteries
• 1120 Peli Case
• 1400 Peli Case
• 1450 Peli Case
• 1500 Peli Case
• ABS Wall Mount Enclosure
• Steel Wall Mount Enclosures
• 4 Core Screened Instrument Cable
• Thermocouple Extension Cable and Connectors
• Bulkhead Connectors
• Cable Glands
• Solid State Relay
• Combined Alarm Sounder & Beacon
• 100dB Audio Alarm Sounder

Subsea & Offshore Systems

• MSL Subsea Data Logger
• Merlin Subsea Data Logger
• Subsea Data Logger SDL Series
• OceanDISP-2
• Subsea Pressure and Temperature Logger
• Subsea Pressure Indicator
• Subsea Acceleration and Vibration Logger
• Subsea Switch
• S520 Submersible Rotary Position Sensor
• DMS600 Series 100mm Subsea Pressure Gauges for up to 900m
• DMS600 Series 63mm Subsea Pressure Gauges for up to 1,200m
• DMS600 Series 100mm Subsea Pressure Gauges for up to 4,000m
• Subsea Stainless Steel Turbine Flow Meters
• NS500 Low Flow Pelton Wheel Flow Meter
• Subsea Temperature Sensor
• LIPS S120 Submersible Cylinder Linear Position Sensor
• LIPS S125 Submersible Linear Position Sensor
• RIPS S520 Submersible Rotary Position Sensor
• TIPS S623 Large Angle Submersible Tilt Sensor
• Subsea Aluminium Housings for Water Depths to 300 metres
• Subsea Stainless Steel Housings for Water Depths to 4000 metres
• Subsea Display Housing
• Subsea Cable Assemblies
• LUXUS Compact Submersible Camera
• LUXUS Low Light Submersible Camera
• LUXUS Colour Zoom Submersible Camera
• LUXUS HD Submersible Camera

Temperature and Humidity

• HBS6000 PT100 Sensors with Integral Temperature Transmitters
• Bespoke Thermocouple and RTD (PT100) Industrial Sensors
• TT-I-CVO Immersion Temperature Transmitter
• TT-C-CVO Strap-on Temperature Sensor
• TT-O & TT-OR Outside Air Sensor
• PyroCouple Compact Non-Contact Temperature Sensor.
• Temperature Transmitters TxBlock & TxRail
• Isolated Temperature Transmitter TxIsoRail
• TxIsoPack Isolated Temperature Transmitter
• Smart Temperature Transmitters ISOLATED TxIsoBlock & TxIsoRail
• Thermocouple and RTD (PT100) probes with flying leads
• PT100 Sensor with ½" BSP Thread
• PT100 Sensor
• K Type Thermocouple
• Mineral Insulated Thermocouple Probes
• Surface Mount Rubber Patch RTD
• K Type Thermocouple, Surface Mount
• Surface Mount and U Bolt PT100 and Thermocouple Sensors
• Pipe Mount K Type Thermocouples
• TT-C Clamp-on Temperature Sensor
• RHT Relative Humidity and Temperature Transmitters
• RHT Climate Relative Humidity and Temperature Transmitters
• RHT MODBUS Relative Humidity and Temperature Transmitters.
• RH-W Wall Mount Temperature and Humidity Transmitter
• HF3 Series Temperature & Humidity Transmitters
• HF5 Series Temperature & Humidity Transmitters
• HF5-EX Series Temperature & Humidity Transmitters for Hazardous Area Installations
• HygroPalm 31 & 32
• HYGROPALM 23
• Humidity Meter - Therma-hygrometers
• Legionnaires Thermometer Kit
• HygroPalm HP-GTS Measuring Instrument for Paper Industry
• CP11 - Handheld Instrument for Temp, RH and CO2 Measurements
• HygroPalm 23 AW
• HYGROCLIP 2. Standard Air Measurement Probes.
• HYGROCLIP 2. Mini Probes.
• HYGROCLIP 2. High Temperature Measurement Probes.
• HYGROCLIP 2. Sword Measurement Probes.
• HYGROCLIP 2. Industrial Cable Mounted Probes
• HYGROCLIP 2. Stainless Steel Industrial Probes
• HYGROCLIP 2. Screw-in Probes
• Hygroclip HC2 EX Probes
• GEN II Wireless Temperature and RH Monitoring System
• GSKIN Heat Flux Kit
• GSKIN U-Value & Heat Flux Measurement Kit
• GSKIN Heat Flux Sensors
• GSKIN Robust Heat Flux Sensors
• 2914 2-Wire Room Temperature Transmitter
• 5131 2-Wire Programmable Transmitter
• 5331 2-Wire Programmable Transmitter
• 5333 2-Wire Programmable Transmitter
• 5334 2-Wire Programmable Transmitter
• 5335 2-Wire Transmitter with HART 5 Protocol
• 5337 2-Wire Transmitter with HART 7 Protocol
• 5343 2-Wire Programmable Level Transmitter
• 6331 2-Wire Programmable Transmitter
• 6333 2-Wire Programmable Transmitter
• 6334 2-Wire Programmable Transmitter
• 6335 2-Wire Transmitter with HART 5 Protocol
• 6337 2-Wire Transmitter with HART 7 Protocol
• 9113 Temperature/mA Converter
• TDMTC Slimline Fast Response Thermocouple Transmitter

Test & Calibration

• PosiTector UTG. Ultrasonic Thickness Gauge.
• PosiTector Inspection Kits
• PosiTest DFT Coating Thickness Meter for Metals
• ThermaData 4 Channel Display & Data Logger
• Therma Plus Waterproof Robust Thermometer
• 3000 Series Drywell Calibrator
• MicroCal 1 Thermocouple Simulator
• MicroCal 2 & 3 Thermocouple Simulator
• Keller Pressure Calibrators
• Hand Pumps for Pressure Generation

Vibration Monitoring

• MTN/1185 RMS Vibration Velocity Sensor with 4-20mA Output
• MTN/1187 RMS Acceleration Sensor with 4-20mA Output
• HS-100 Series - General Purpose AC Accelerometer
• HS-100T Series - Dual Output, Top Entry Accelerometer
• HS-100 Series - Submersible Industrial Accelerometer
• HS-100S Series - Low Profile Submersible Accelerometer
• HS-100I - Intrinsically Safe Accelerometer
• HS-105 - High Temperature Accelerometer
• HS-170 Premium Accelerometer with AC Output
• Senturion XPR02 Proximity Probe
• Senturion XPR04 Proximity Probe
• Senturion XPR12 Proximity Probe System
• Senturion XPR08 Proximity Probe
• Senturion XPD12 Disc Mounted Proximity Probe
• Senturion XPD25 Disc Mounted Proximity Probe
• VM220 & VM330D Portable Vibration Meters
• VM-6360 Hand Held Vibration Meter
• HS-620 & HS-630 Vibration Meter Kits
• HS 500 Series - Protection System
• HS-556 Vibration Module with 4-20mA Output

Voltage & Current Sensors Energy Monitoring Systems

• QI-V-485 RMS AC/DC Current Transformer Ranges 50 & 300 AMPS RS485 MODBUS
• Omni C Series Current Transducers
• Self Powered, Split Core AC Current Sensors
• DC Current Shunt Resistors
• HT1B & HT2B - DC Current Transformers / Transducers - Torroidal
• Watt Hour AC Current Sensors
• CTH Current Transducer - Through Hole Core Type
• CTH Split Core Current Transducers
• QA-POWER-M Single Phase Network Power Analyser and Data Logger
• TM2U - AC Voltage Isolated Transducer - RMS
• RI-TV Series Isolated True RMS Voltage Transducer
• AC Voltage Sensors, Ranges 0-300 and 0-600 VAC
• AC Voltage Transducers
• VS500 Voltage Transducer
• DC Voltage Transducers
• 3 Phase Voltage Monitor with Relay Output
• TM8P - Programmable Isolated Transducer - True RMS
• QI Single Phase Power & Energy Meter
• Conto D4-Sh - Multifunction Power Meters
• Conto D4-Pt MID Approved Energy Meter
• Conto D4-Pd kWh Meter
• Direct Input Multifunction Energy Meter
• Direct Input MID Approved KWh Meters
• ND-350 Multi-Function Meter
• Nemo 96 HD Multi-Function Power Meters
• Nemo D4-DC Multi-Function DC Power Meter
• DBP Series Split Core Current Transformers.
• TAS Series Fixed Core Current Transformers.
• PM-CT-M Current Transformer
• PM-CT-xSC Current Transformers (Split Core)
• Smappee Infinity Energy Monitoring
• GRD Solar Panel Efficiency Monitoring System
• GEN II Wireless Energy Monitoring System
• Power Logger for AC Current, Voltage, kWh
• G4 Diaphragm Gas Flow Meter - MID Approved
• G6 Diaphragm Gas Flow Meter - MID Approved

Water Quality & Waste Water Management Systems

• AquaPlus Package
• AP-Lite Aquaprobe Package
• Ex-FlowSIREN ATEX Approved Flow Monitor For Open Channels and Sewers
• FlowSIREN Multi Channel Wireless Logger for Flow, Pressure. Level & Water Quality
• PressurePUX Portable Wireless Pressure Logger
• HygroLab - Laboratory Device for Water Activity Measurements
• HC2-AW-USB Water Activity Station Probe
• Sample Holders and Disposable Sample Containers
• Grain Moisture Meters
• 7000 Handheld Moisture Meter Kit
• WLM4 - Four Channel Water Leak Detection Module
• Condensation Prevention Sensor WD-CPS
• Rain Sensor with Integral Heater
• DO6400-7400 Dissolved Oxygen Sensor
• Galvanic Dissolved Oxygen Probes
• Polargraphic Dissolved Oxygen Electrode
• S8000 Series PH Probes
• Industrial PH Probes
• PH Probes for Laboratories
• 8100 PH and Temperature Meter Kit
• CS150 Conductivity Probes
• Industrial Conductivity Probes

Weather Stations and Instruments

• WindSonic Solid State Wind Speed and Direction Sensor
• WindUltra Ultrasonic Wind Speed and Direction Sensor
• GMX200 Wind Speed & Direction Sensor with Compass
• WindObserver 65 Ultrasonic Anemometer
• WindObserver 70, 75 & 90 Ultrasonic Anemometers
• WindObserver II Ultrasonic Anemometer
• Intrinsically Safe WindObserver Ultrasonic Anemometer
• Meteorological TFT Wind Speed & Direction Display
• WindMaster 3D Ultrasonic Anemometer
• Meteorological Sensor for Wind Speed and Direction
• Meteo Anemometer for Wind Speed and Direction (meteoprobe)
• OMC-160 Wind Speed and Direction Sensor CAA Approved
• Low Cost Yacht Anemometer
• MetConnect Weather Stations
• GMX240 Weather Station for Wind Speed, Direction and Rainfall
• GMX300 Weather Station for Temperature, Humidity & Pressure
• GMX301 Weather Station for Temp, RH, Pressure & Solar Radiation
• GMX400 Weather Station for Temp, RH, Pressure & Precipitation
• GMX500 Weather Station for Wind, Temp, RH & Pressure
• GMX501 Weather Station for Wind, Temp, RH, Pressure & Solar Radiation
• GMX531 Weather Station - Wind, Temp, RH, Pressure, Solar & Precipitation
• GMX550 Weather Station - Wind, Temp, RH, Pressure & Precipitation
• GMX551 Weather Station - Wind, Temp, RH, Pressure, Solar & Precipitation
• GMX560 Marine Weather Station for Wind, Temp, RH & Pressure
• GMX600 Weather Station for Wind, Temp, RH, Pressure & Precipitation
• RWS-05 Remote Weather Station
• SP Lite2 Silicon Pyranometer
• CMP3 Pyranometer
• SMP3 Smart Pyranometer
• CMP6 Pyranometer
• SMP6 Smart Pyranometer
• CMP10 Pyranometer
• SMP10 Smart Pyranometer
• SMP12 Fast Response Smart Pyranometer
• CMP21 Pyranometer
• CMP22 Pyranometer
• SMP22 Smart Pyranometer
• CVF 4 Ventilation Unit
• Meteon Data Logger
• Meteon 2.0 Data Logger
• CGR4 Pyrgeometer
• SGR4 Smart Pyrgeometer
• CUV5 Ultra-Violet Radiometer
• SUV Series UV Spectrum Radiometers
• NR Lite2 Net Radiometer
• CNR4 Net Radiometer
• RaZON+ All-In-One Solar Monitoring System
• Solys2 Sun Tracker
• CM121 Shadow Ring
• CHP1 Pyrheliometer
• SHP1 Smart Pyrheliometer
• CSD3 Sunshine Duration Sensor
• External Light Level Sensors
• Internal Light Level Sensors
• Internal Light Level & Occupancy Sensors
• GEN II Wireless Environmental Monitoring System
• Stevenson Screen Model 306
• TR-525 Tipping Bucket Rain Gauge
• MR42 Rain Sensor

Accessories − Enclosures, Cable, Connectors & PSUs

• DR-30 Series DIN Rail Mounted Power Supply - 12vDC at 24 Watts
• FTR DIN Rail Mounted Power Supply - 24vDC at 3 Watts
• DRAN30 Series Power Supply - 24vDC at 30 Watts
• DRAN120 Series Power Supply - 24vDC at 120 Watts
• DR-60 Series DIN Rail Mounted Power Supply - 24vDC at 60 Watts
• DC to DC Converter with Screw Terminals
• DC to DC Converters for Sensor Excitation
• 4 Core High Temperature Cable
• Magnetic Reed Switch
• Colinear GSM Antenna
• Micromag GSM Antenna
• Low Profile GSM, WiFi Body Mounted Antenna
• Low Profile UHF & VHF Antenna
• Dipole 2.4GHz WiFi Antenna
• Dome Shaped 2.4GHz Wi-Fi Antenna

Quick Overview

Applications

• Linearised, electronic temperature measurement with RTD or TC sensor.
• Conversion of linear resistance variation to a standard analogue current / voltage signal, i.e. from solenoids and butterfly valves or linear movements with attached potentiometer.
• Power supply and signal isolator for 2-wire transmitters.
• Process control with 2 pairs of potential-free relay contacts and analogue output.
• Galvanic separation of analogue signals and measurement of floating signals.
• The PR 4116 is designed according to strict safety requirements and is thus suitable for application in SIL 2 installations.
• Input for RTD, TC, Ohm, potentiometer, mA and V
• 2-wire supply > 16 V
• FM-approved for installation in Div. 2
• Output for current, voltage and 2 relays
• Universal AC or DC supply
• Programmable via detachable display front (4501), process calibration, signal and relay simulation, password protection, error diagnostics and selection of help text in several languages.

4510 Display/Programming Interface

Application:

• Communications interface for modification of operational parameters in 4116.
• Can be moved from one 4116 module to another and download the configuration of the first converter to subsequent converters.
• Fixed display for readout of process data and status

Technical characteristics:

• LCD display with 4 lines; line 1 (H = 5.57 mm) shows input signal, line 2 (H = 3.33 mm) shows units. Line 3 alternates between digital output value and scaling (kHz, Hz, mHz, P/m, P/h, P/d) or shows TAG no. Line 4 shows tendency readout for the input signal and communication status.
• Programming access can be blocked by assigning a password. The password is saved in the converter in order to ensure a high degree of protection against unauthorised modifications to the configuration.

4511 Modbus Communications Interface

• The 4511 detachable display adds Modbus RTU RS485 serial communications to all current and future 4000/9000 series units
• All individual unit operating parameters can easily and quickly be configured by using the Modbus communication or by using the front display menu
• The 4511 display can be used to read the process signal, simulate the output signal, indicate sensor errors and internal device errors
• 4511 has full 4501 functionality for programming and display
• RS485 Modbus RTU protocol 
• Multi-drop half-duplex connection via shielded RJ45 connector on top of module
• Modbus parameters such as address, baud rate, stop bit(s) and parity bits are configured from, and stored on, the 4511 interface
• 2.5kVAC galvanic isolation between serial wiring and 4000/9000 units

4512 Bluetooth Communications Interface

• Program devices via Bluetooth using an iOS/Android device running the free PPS app (PR Process Supervisor).
• Use PPS data for preventive maintenance.
• All logged data can be exported in .csv format, for advanced data analysis off-site.
• On-site analysis of real-time process data on an iOS/Android compatible device.
• Off-site analysis of historic process data on a PC using PReset.
• PR 4512 runs Bluetooth 4.2, and requires a smart device with 4.0 or newer.
• PPS is compatible with iOS and Android devices.
• The PR 4512 automatically detects the device setting on the connected PR 4000 and 9000 device.
• An internal battery energizes the 4512 real-time clock for at least 2 years, should the 4512 remain de-energized.
• Typical data logging capacity is more than 30 days at 1 second intervals.
• Easy to read dot matrix LCD display.
• Fast pairing or safe pairing via two-factor authentication.

Android App for 4512 Interface

The image on the right links to the Google Play store to download the PR Electronics PPS application used to enables Android devices to connect to the Bluetooth Communications Interface. The app allows for the configuration, viewing of sensor live data and collection of logged data using the wireless Bluetooth connection.

If required, Omni Instruments will program a 4116, 4501, 4511, or 4512 to your specific requirements. Please contact us for details.

Availability: Stock Item

Components / Downloads

For further information, technical advice, or a quotation please call or email us. If you are not sure which product you need one of our technical sales advisors will be happy to discuss your application. We also accept company purchase orders by fax or post. Credit card orders can also be placed over the phone for any product.

+44 (0) 1382 443000

Omni Instruments Ltd, Unit 1, 14 Nobel Road, Wester Gourdie Industrial Estate, Dundee, DD2 4UH, UK

Trip Amplifiers

• Signal Conditioners
• Switch Amplifiers
• Frequency Converters
• Solenoid Drivers
• Relay Modules
• Transmitter Power Supplies
• Signal Converters
• Current Drivers
• Accessories

• View Portfolio
• See Overview
• Browse Literature
• Service Level Agreements for ecom instruments
• Where to Buy
• Technologies
• Control System Solutions
• Download Technical Documents
• Press Releases
• International Trade Shows

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

• Industrial Sensors
• Explosion Protection
• Whistleblowing and Complaints Procedure
• What's New?
• Select Country
• Legal Notice
• Privacy Policy

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.

SIL 2 Temperature Signal Converter to Trip Amplifiers – D5273S

• General Details
• Attached Documents

Output signal can be direct or reverse. Output function can be configured as: Adder, subtractor, low/high selector. Modbus RTU RS-485 output is available on Bus connector. Cold junction compensation can be programmed as automatic, using an internal temperature sensor or fixed to a user-customizable temperature value.

D5273S offers two independent trip amplifiers via two SPDT output relays. Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards, in Safe Area or in Zone 2.

Hazardous area: Millivolt or thermocouple type A1, A2, A3, B, E, J, K, L, LR, N, R, S, T, U, or 2-3-4 wire RTD Pt50, Pt100, Pt200, Pt300, Pt400, Pt500, Pt1000 (IEC), Pt100 (ANSI 0.3916), Ni100, Ni120 (DIN43760), Pt46, Pt50, Pt100, Pt200, Pt300, Pt400, Pt500, Cu50, Cu53, Cu100 (GOST6651 russian standard) and Cu9.035 (or Cu10), or 3 wire transmitting potentiometer (100 Ω to 10 kΩ). Choice between °C/°F. Possibility of configuring user customized sensor (TC or RTD).

Safe area: Fully customizable 0/4 to 20 mA. Modbus available.

• D5273S SIL 2 according to IEC 61508 for Tproof = 5 years (10 % of total SIF)
• Input from Zone 0 (Zone 20), installation in Zone 2
• mV, thermocouple, 2 or 3 or 4 wire RTD or transmitting potentiometer Input Signal
• 2-wire RTD line resistance compensation
• Internal Reference Junction Compensation automatic or fixed (programmable value)
• Fastest integration time: 50 ms
• 4-20 mA Output Signal temperature linear or reverse
• Modbus RTU RS-485 Output
• Two independent Trip Amplifiers each with SPDT relay contacts 4A 250 Vac 1000VA
• Multiple Fault detection
• High Accuracy, μP controlled A/D converter
• Three port isolation, Input/Output/Supply
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system
• Fully programmable operating parameters
• ATEX, IECEx Certifications
• High Density, one Analog Output + two Alarms
• Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus
• 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier

SIL Level: D5273S, according IEC 61508 & IEC 61511, is suitable for applications up to safety integrity level SIL 2.

Full Product Range

• Calibrators
• Chart Recorders
• Controllers & Indicators
• Flow Meter Range
• Level Sensors
• Power Control
• Safety Integrity Level (SIL)
• Temperature
• Valves & Valve Control
• Redundant ABB Analytical Products
• Redundant ABB Flow Products
• Redundant ABB Pressure Products
• Redundant ABB R&C Products
• Redundant ABB Temperature Products
• 01706 216667
• 01706 216681
• [email protected]